Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Passat B5
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Passat

Instant download

VW Passat 1.8 20V Stage 1 file Bosch HW 0261204956 · 8D0907558S · SW 356669

Petrol · 125 hp (92 kW)

Share WhatsApp Facebook

VW / Volkswagen Passat B5 1996–2005

Dyno sheet

Power
135 hp +10
Torque
188 Nm +15
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0050751001501502252003001000200030004000500060007000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 1.8i 20v. Results depend on the car's condition, fuel and parts.

Power
125 hp 92 kW
ECU
Bosch
Engine
1.8i 20v Petrol · 1,781 cc · 4 cyl
File
128 KB BIN, ready to write

Bosch on the VW Passat 1.8 20V

Software and hardware

Hardware
0261204956 Bosch's number for the ECU itself, on its label printed 0 261 204 956
Part number
8D0907558S Volkswagen's part number for this ECU, printed 8D0 907 558 S
Software
356669 (1037356669) The software inside: your read must show this number

Check your read against this file

Built on request for the VW Passat 1.8 20V

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs
  • Anti-lag

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261204956, part number 8D0907558S and software 356669
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261204956, part number 8D0907558S and software 356669 (1037356669), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the VW Passat 1.8 20V (92 kW, 125 hp), for its Bosch ECU with hardware 0261204956, part number 8D0907558S and software 356669 (1037356669). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 1.8i 20v refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.

The VW Passat 1.8 20V carries the 1.8i 20v engine, 125 hp and 173 Nm from the factory. On this engine, Stage 1 usually gives about 135 hp and 188 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 356669 of the VW Passat 1.8 20V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

Read the Bosch ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.8i 20v engine with the same ECU is fitted to the Audi A4 B5: their file can be the same, so check the software number of your read.

Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261204956 is the number on the Bosch ECU's label. Software 356669 (1037356669) is the calibration inside it: a read with hardware 0261204956 and another software number needs a different file. Part number 8D0907558S is the car maker's number for this ECU.

Questions

Which ECU does this VW Passat 1.8 20V Stage 1 file fit?

A Bosch ECU with hardware 0261204956, part number 8D0907558S and software 356669 (1037356669). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Passat 1.8 20V?

Usually about 135 hp and 188 Nm against 125 hp and 173 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 128 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read