Instant download
Audi A4 1.8 20V original file Bosch ME7.5 HW 0261206040 · 8D0906018E · SW 352799
Petrol · 125 hp (92 kW)
Choose your file
Launch control, anti-lag, rolling anti-lag and no-lift shift for Bosch ME7
This function is available for this file: set your values here and download the file built on this Original file. Sign in to make it, or join the membership and make files from any read we hold.
Beta. These functions are new; if a file you make does not do what this page says, tell us and we correct it free.
Dyno sheet
- Power
- 125 hp
- Torque
- 170 Nm
Typical crank figures for a healthy 1.8i 20v. Results depend on the car's condition, fuel and parts.
- Power
- 125 hp 92 kW
- ECU
- Bosch ME7.5
- Engine
- 1.8i 20v Petrol · 1,781 cc · 4 cyl
- File
- 512 KB BIN, ready to write
Bosch ME7.5 on the Audi A4 1.8 20V
Software and hardware
- Hardware
- 0261206040 Bosch's number for the ECU itself, on its label printed 0 261 206 040
- Part number
- 8D0906018E Audi's part number for this ECU, printed 8D0 906 018 E
- Software
- 352799 (1037352799) The software inside: your read must show this number
How the Bosch ME7.5 is read: OBD and Bench
Older tools
Built on request for the Audi A4 1.8 20V
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261206040, part number 8D0906018E and software 352799
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261206040, part number 8D0906018E and software 352799 (1037352799), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the Audi A4 1.8 20V (92 kW, 125 hp), for its Bosch ME7.5 ECU with hardware 0261206040, part number 8D0906018E and software 352799 (1037352799). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Audi A4 1.8 20V carries the 1.8i 20v engine, 125 hp and 170 Nm from the factory. On this engine, Stage 1 usually gives about 135 hp and 185 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 352799 of the Audi A4 1.8 20V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch ME7.5 ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 1.8i 20v engine with the same ECU is fitted to the Volkswagen Passat B5: their file can be the same, so check the software number of your read.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261206040 is the number on the Bosch ECU's label. Software 352799 (1037352799) is the calibration inside it: a read with hardware 0261206040 and another software number needs a different file. Part number 8D0906018E is the car maker's number for this ECU.
Questions
Which ECU does this Audi A4 1.8 20V original file fit?
A Bosch ME7.5 ECU with hardware 0261206040, part number 8D0906018E and software 352799 (1037352799). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ME7.5 read and written?
Over OBD and on the bench, with tools such as CMD Flash. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Audi A4 1.8 20V?
Usually about 135 hp and 185 Nm against 125 hp and 170 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ME7.5 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand