Original file
Original / Factory · Petrol · 180 CGi 122hp
MB C 200 CDI original file Bosch HW 0281011006 · SW 351825
Mercedes-Benz C 200 CDI 89.7 kW (122 HP) Original89.7 kW (122 hp)
122 HP Factory calibration Stock backup file, 200 Nm, Petrol
Calibrated ECU file for 0281011006 (SW 351825). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 180 CGi 122hp, OM270 DE 16 AL red., 1.6L, Petrol. Engine #4541 in our gains database.
- Power
- 122 HPfactory calibration
- Torque
- 200 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011006 and software 351825.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C 200 |
| Fuel / Induction | CDI (Turbo Diesel) |
| Factory power | 89.7 kW (122 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011006 |
| ECU software | 351825 |
| Calibration stage | Original (Factory) |
| OEM engine code | OM270 DE 16 AL red. |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 200 Nm | — | — |
| Stage 1 | 175 HP | 310 Nm | +53 (43.4%) | +110 |
| Stage 2 | 186 HP | 326 Nm | +64 (52.5%) | +126 |
| Stage 3 | 201 HP | 342 Nm | +79 (64.8%) | +142 |
| Stage 4 | 238 HP | 370 Nm | +116 (95.1%) | +170 |
About this calibration file
This is the factory (original) ECU calibration for the Mercedes-Benz C 200 CDI (Turbo Diesel), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281011006 and software version 351825. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011006 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB C 200 CDI 89.7KW with Bosch 0281011006 (Bosch software number 351825 ( 1037351825 )). This original file corresponds to a factory engine output of approximately 89.7 kW (~122 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011006, 351825 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
16270DC2 9636932D 5C8FD38C EE3C058A 67AAF917 0C1D4F7D ABCE50D8 1AFA0910