Stage 1
Stage 1 · Diesel · 180d 116hp
MB C 200 CDI Stage 1 file Bosch HW 0281011006 · SW 351825
Mercedes-Benz C 200 CDI Turbo Diesel 85.3 kW (116 HP) Stage 12002, Turbo diesel, 85.3 kW (116 hp)
116 → 140 HP +24 HP +50 Nm 21% more power
Calibrated ECU file for 0281011006 (SW 351825). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 180d 116hp, 1.5L, Diesel. Engine #4544 in our gains database.
- Power
- 140 HP+24 HP from 116
- Torque
- 310 Nm+50 Nm from 260
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011006 and software 351825.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | C 200 |
| Model year | 2002 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 85.3 kW (116 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011006 |
| ECU software | 351825 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1461 CC |
| Compression ratio | 15,0 : 1 |
| Bore × Stroke | 76,0 X 80,5 mm |
| OEM engine code | 180d 116hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 116 HP | 260 Nm | — | — |
| Stage 1 | 140 HP | 310 Nm | +24 (20.7%) | +50 |
| Stage 2 | 147 HP | 322 Nm | +31 (26.7%) | +62 |
| Stage 3 | 174 HP | 403 Nm | +58 (50%) | +143 |
| Stage 4 | 209 HP | 481 Nm | +93 (80.2%) | +221 |
About this calibration file
The Stage 1 calibration for the 2002 Mercedes-Benz C 200 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281011006 and software version 351825. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 140 HP and 310 Nm at the crank — a gain of +24 HP (21%) and +50 Nm over the factory 116 HP / 260 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011006 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for MB C 200 CDI 2002 Turbodiesel 85.3KW with Bosch 0281011006 (Bosch software number 351825 ( 1037351825 )). The base stock vehicle for this calibration has a factory output of around 85.3 kW (~116 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011006, 351825 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8B992D28 D1B7654E B18F131B 50751871 FE65B987 88D00B90 0515447F 24FDCD1E