Instant download
VW Passat 1.8 TFSI original file Bosch MED17.5 HW 0261201537 · SW 391697
2009 · Turbo petrol · 160 hp (118 kW)
Choose your file
Dyno sheet
- Power
- 160 hp
- Torque
- 250 Nm
Typical crank figures for a healthy 1.8 TSI. Results depend on the car's condition, fuel and parts.
- Power
- 160 hp 118 kW
- ECU
- Bosch MED17.5
- Engine
- 1.8 TSI Turbo petrol · 1,798 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch MED17.5 on the VW Passat 1.8 TFSI
Software and hardware
- Hardware
- 0261201537 Bosch's number for the ECU itself, on its label printed 0 261 201 537
- Software
- 391697 (1037391697) The software inside: your read must show this number
How the Bosch MED17.5 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Passat 1.8 TFSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261201537 and software 391697
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261201537 and software 391697 (1037391697), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2009 VW Passat 1.8 TFSI (118 kW, 160 hp), for its Bosch MED17.5 ECU with hardware 0261201537 and software 391697 (1037391697). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Passat 1.8 TFSI carries the 1.8 TSI engine, 160 hp and 250 Nm from the factory. On this engine, Stage 1 usually gives about 210 hp and 310 Nm (+50 hp, +60 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 391697 of the VW Passat 1.8 TFSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch MED17.5 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 1.8 TSI engine with the same ECU is fitted to the Audi A3 8P FL, Audi TT 8J, Volkswagen Golf VI and Volkswagen Passat B7: their file can be the same, so check the software number of your read.
Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261201537 is the number on the Bosch ECU's label. Software 391697 (1037391697) is the calibration inside it: a read with hardware 0261201537 and another software number needs a different file.
Questions
Which ECU does this VW Passat 1.8 TFSI original file fit?
A Bosch MED17.5 ECU with hardware 0261201537 and software 391697 (1037391697). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch MED17.5 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Passat 1.8 TFSI?
Usually about 210 hp and 310 Nm against 160 hp and 250 Nm stock (+50 hp, +60 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch MED17.5 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand