Instant download
Audi A3 1.8 TFSI original file Bosch MED17 · 8K1907115 · SW 503179
2011 · Turbo petrol · 160 hp (118 kW)
Choose your file
Dyno sheet
- Power
- 160 hp
- Torque
- 250 Nm
Typical crank figures for a healthy 1.8 TFSi. Results depend on the car's condition, fuel and parts.
- Power
- 160 hp 118 kW
- ECU
- Bosch MED17
- Engine
- 1.8 TFSi Turbo petrol · 1,798 cc · 4 cyl
- File
- 1.47 MB BIN, ready to write
Bosch MED17 on the Audi A3 1.8 TFSI
Software and hardware
- Part number
- 8K1907115 Audi's part number for this ECU, printed 8K1 907 115
- Software
- 503179 (1037503179) The software inside: your read must show this number
How the Bosch MED17 is read: OBD, Bench and Boot
Older tools
Built on request for the Audi A3 1.8 TFSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 8K1907115 and software 503179
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 8K1907115 and software 503179 (1037503179), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2011 Audi A3 1.8 TFSI (118 kW, 160 hp), for its Bosch MED17 ECU with part number 8K1907115 and software 503179 (1037503179). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Audi A3 1.8 TFSI carries the 1.8 TFSi engine, 160 hp and 250 Nm from the factory.
This file of software 503179 of the Audi A3 1.8 TFSI downloads straight after payment. Another stage of it can be built from your own read by our engineers.
The Bosch MED17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 1.8 TFSi engine with the same ECU is fitted to the Audi TT 8J, Volkswagen Golf VI, Volkswagen Passat B6 and Volkswagen Passat B7: their file can be the same, so check the software number of your read.
Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 503179 (1037503179) is the calibration inside the Bosch ECU. Part number 8K1907115 is the car maker's number for this ECU.
Questions
Which ECU does this Audi A3 1.8 TFSI original file fit?
A Bosch MED17 ECU with part number 8K1907115 and software 503179 (1037503179). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch MED17 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
Can you add catalyst off to the Bosch MED17 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 1.47 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand