Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Passat B5
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Passat

Instant download

VW Passat 1.8 T original file Bosch MED17.5 HW 0261201537 · 06J906026 · SW 393905

2002 · Turbo petrol · 150 hp (110 kW)

Share WhatsApp Facebook

VW / Volkswagen Passat B5 1996–2005

Dyno sheet

Power
150 hp
Torque
210 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.005075100150150225200300200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.8T. Results depend on the car's condition, fuel and parts.

Power
150 hp 110 kW
ECU
Bosch MED17.5
Engine
1.8T Turbo petrol · 1,781 cc · 4 cyl
File
2 MB BIN, ready to write

Bosch MED17.5 on the VW Passat 1.8 T

Software and hardware

Hardware
0261201537 Bosch's number for the ECU itself, on its label printed 0 261 201 537
Part number
06J906026 Volkswagen's part number for this ECU, printed 06J 906 026
Software
393905 (1037393905) The software inside: your read must show this number

Check your read against this file

How the Bosch MED17.5 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the VW Passat 1.8 T

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs
  • Anti-lag

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261201537, part number 06J906026 and software 393905
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261201537, part number 06J906026 and software 393905 (1037393905), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2002 VW Passat 1.8 T (110 kW, 150 hp), for its Bosch MED17.5 ECU with hardware 0261201537, part number 06J906026 and software 393905 (1037393905). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Passat 1.8 T carries the 1.8T engine, 150 hp and 210 Nm from the factory.

This file of software 393905 of the VW Passat 1.8 T downloads straight after payment. Another stage of it can be built from your own read by our engineers.

The Bosch MED17.5 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, MagicMotorsport FLEX, CMD Flash, Dimsport NewGenius and Dimsport New Genius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261201537 is the number on the Bosch ECU's label. Software 393905 (1037393905) is the calibration inside it: a read with hardware 0261201537 and another software number needs a different file. Part number 06J906026 is the car maker's number for this ECU.

Questions

Which ECU does this VW Passat 1.8 T original file fit?

A Bosch MED17.5 ECU with hardware 0261201537, part number 06J906026 and software 393905 (1037393905). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch MED17.5 read and written?

Over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, MagicMotorsport FLEX, CMD Flash and Dimsport NewGenius. Write the file back the same way you read the ECU, and keep your original read.

Can you add catalyst off to the Bosch MED17.5 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read