Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Touran I
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Touran

Instant download

VW Touran 1.6 FSI original file Bosch MED9.5.10 HW 0261S02307 · 03C906056DF · SW 380018

2004 · Petrol · 115 hp (85 kW)

Share WhatsApp Facebook

VW / Volkswagen Touran I 2003–2015

Dyno sheet

Power
115 hp
Torque
155 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.003850751001131501502001000200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.6 FSI. Results depend on the car's condition, fuel and parts.

Power
115 hp 85 kW
ECU
Bosch MED9.5.10
Engine
1.6 FSI Petrol
File
2 MB BIN, ready to write

Bosch MED9.5.10 on the VW Touran 1.6 FSI

Software and hardware

Hardware
0261S02307 Bosch's number for the ECU itself, on its label printed 0 261 S02 307
Part number
03C906056DF Volkswagen's part number for this ECU, printed 03C 906 056 DF
Software
380018 (1037380018) The software inside: your read must show this number

Check your read against this file

How the Bosch MED9.5.10 is read: OBD and Bench

  • OBD
  • Bench
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash

Older tools

  • KESS V2
  • MPPS

Built on request for the VW Touran 1.6 FSI

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs
  • Anti-lag

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261S02307, part number 03C906056DF and software 380018
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261S02307, part number 03C906056DF and software 380018 (1037380018), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2004 VW Touran 1.6 FSI (85 kW, 115 hp), for its Bosch MED9.5.10 ECU with hardware 0261S02307, part number 03C906056DF and software 380018 (1037380018). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Touran 1.6 FSI carries the 1.6 FSI engine, 115 hp and 155 Nm from the factory. On this engine, Stage 1 usually gives about 125 hp and 170 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 380018 of the VW Touran 1.6 FSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch MED9.5.10 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, bFlash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261S02307 is the number on the Bosch ECU's label. Software 380018 (1037380018) is the calibration inside it: a read with hardware 0261S02307 and another software number needs a different file. Part number 03C906056DF is the car maker's number for this ECU.

Questions

Which ECU does this VW Touran 1.6 FSI original file fit?

A Bosch MED9.5.10 ECU with hardware 0261S02307, part number 03C906056DF and software 380018 (1037380018). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch MED9.5.10 read and written?

Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and bFlash. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Touran 1.6 FSI?

Usually about 125 hp and 170 Nm against 115 hp and 155 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch MED9.5.10 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read