Instant download
VW Tiguan 2.0 TDI CR Stage 2 file Bosch EDC17 · 03L906018LK · SW 528324
2013 · Turbo diesel · 110 hp (81 kW)
Choose your file
Dyno sheet
- Power
- 195 hp +85
- Torque
- 420 Nm +170
Typical crank figures for a healthy 2.0 TDI. Results depend on the car's condition, fuel and parts.
- Power
- 110 hp 81 kW
- ECU
- Bosch EDC17
- Engine
- 2.0 TDI Turbo diesel · 1,968 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC17 on the VW Tiguan 2.0 TDI CR
Software and hardware
- Part number
- 03L906018LK Volkswagen's part number for this ECU, printed 03L 906 018 LK
- Software
- 528324 (1037528324) The software inside: your read must show this number
How the Bosch EDC17 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Tiguan 2.0 TDI CR
- DPF off
- EGR off
- AdBlue (SCR) off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
- Start/stop off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03L906018LK and software 528324
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03L906018LK and software 528324 (1037528324), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 2 file is
This is a Stage 2 tune of the factory calibration of the 2013 VW Tiguan 2.0 TDI CR (81 kW, 110 hp), for its Bosch EDC17 ECU with part number 03L906018LK and software 528324 (1037528324). Stage 2 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Stage 2 on the 2.0 TDI goes further than Stage 1 and expects supporting parts: a freer exhaust or downpipe, a bigger intercooler and a clutch rated for the torque. Fit them first; on a standard car a Stage 2 file asks more than the parts give.
The VW Tiguan 2.0 TDI CR carries the 2.0 TDI engine, 110 hp and 250 Nm from the factory. On this engine, Stage 1 usually gives about 185 hp and 410 Nm (+75 hp, +160 Nm); Stage 2 usually gives about 195 hp and 420 Nm (+85 hp, +170 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 528324 of the VW Tiguan 2.0 TDI CR we sell the original, Stage 1 and Stage 2. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX and CMD Flash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 528324 (1037528324) is the calibration inside the Bosch ECU. Part number 03L906018LK is the car maker's number for this ECU.
Questions
Which ECU does this VW Tiguan 2.0 TDI CR Stage 2 file fit?
A Bosch EDC17 ECU with part number 03L906018LK and software 528324 (1037528324). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX and CMD Flash. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Tiguan 2.0 TDI CR?
Usually about 185 hp and 410 Nm against 110 hp and 250 Nm stock (+75 hp, +160 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the VW Tiguan 2.0 TDI CR?
Stage 1, about 185 hp and 410 Nm, is for a standard car. Stage 2, about 195 hp and 420 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand