Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Polo III 6N
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Polo

Instant download

VW Polo 1.6 16V original file 036906033A

2002 · Petrol · 125 hp (92 kW)

Share WhatsApp Facebook

VW / Volkswagen Polo III 6N 1995–2003

Dyno sheet

Power
125 hp
Torque
152 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0050501001001501502002001000200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.6 16V GTI. Results depend on the car's condition, fuel and parts.

Power
125 hp 92 kW
Engine
1.6 16V GTI Petrol
File
512 KB BIN, ready to write

The VW Polo 1.6 16V file

Software and hardware

Part number
036906033A Volkswagen's part number for this ECU, printed 036 906 033 A

Check your read against this file

Built on request for the VW Polo 1.6 16V

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numberspart number 036906033A
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows part number 036906033A, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2002 VW Polo 1.6 16V (92 kW, 125 hp), for its ECU with part number 036906033A. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Polo 1.6 16V carries the 1.6 16V GTI engine, 125 hp and 152 Nm from the factory. On this engine, Stage 1 usually gives about 142 hp and 162 Nm (+17 hp, +10 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the VW Polo 1.6 16V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

Read the ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off and speed limiter (Vmax) off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Part number 036906033A is the car maker's number for this ECU.

Questions

Which ECU does this VW Polo 1.6 16V original file fit?

A ECU with part number 036906033A. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the ECU read and written?

With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Polo 1.6 16V?

Usually about 142 hp and 162 Nm against 125 hp and 152 Nm stock (+17 hp, +10 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read