Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Polo IV 9N3
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Polo

Instant download

VW Polo 1.4 TDI original file Bosch EDC17 · 03G906013 · SW 503917

Turbo diesel · 80 hp (59 kW)

Share WhatsApp Facebook

VW / Volkswagen Polo IV 9N3 2005–2009

Dyno sheet

Power
80 hp
Torque
190 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00257550150752251003001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.4 TDi Bluemotion. Results depend on the car's condition, fuel and parts.

Power
80 hp 59 kW
ECU
Bosch EDC17
Engine
1.4 TDi Bluemotion Turbo diesel · 1,422 cc · 3 cyl
File
1.47 MB BIN, ready to write

Bosch EDC17 on the VW Polo 1.4 TDI

Software and hardware

Part number
03G906013 Volkswagen's part number for this ECU, printed 03G 906 013
Software
503917 (1037503917) The software inside: your read must show this number

Check your read against this file

How the Bosch EDC17 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter
  • Bitbox
  • DFOX
  • Cummins Diagnostics
  • Caterpillar/Perkins Diagnostics

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the VW Polo 1.4 TDI

  • DPF off
  • EGR off
  • AdBlue (SCR) off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off
  • Start/stop off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numberspart number 03G906013 and software 503917
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows part number 03G906013 and software 503917 (1037503917), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the VW Polo 1.4 TDI (59 kW, 80 hp), for its Bosch EDC17 ECU with part number 03G906013 and software 503917 (1037503917). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Polo 1.4 TDI carries the 1.4 TDi Bluemotion engine, 80 hp and 190 Nm from the factory.

This file of software 503917 of the VW Polo 1.4 TDI downloads straight after payment. Another stage of it can be built from your own read by our engineers.

The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner and CMD Flash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.4 TDi Bluemotion engine with the same ECU is fitted to the Skoda Fabia I: their file can be the same, so check the software number of your read.

DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Software 503917 (1037503917) is the calibration inside the Bosch ECU. Part number 03G906013 is the car maker's number for this ECU.

Questions

Which ECU does this VW Polo 1.4 TDI original file fit?

A Bosch EDC17 ECU with part number 03G906013 and software 503917 (1037503917). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch EDC17 read and written?

Over OBD and on the bench, with tools such as Autotuner and CMD Flash. Write the file back the same way you read the ECU, and keep your original read.

Can you add DPF off and EGR off to the Bosch EDC17 file?

Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 1.47 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read