Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Passat B6
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Passat

Instant download

VW Passat 3.6 FSI original file Bosch HW 0261S02625 · 03H906032DQ · SW 394385

2008 · Petrol · 300 hp (221 kW)

Share WhatsApp Facebook

VW / Volkswagen Passat B6 2005–2010

Dyno sheet

Power
300 hp
Torque
350 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00100150200300300450400600200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy R36 - 3.6 FSI. Results depend on the car's condition, fuel and parts.

Power
300 hp 221 kW
ECU
Bosch
Engine
R36 - 3.6 FSI Turbo petrol · 3,597 cc · 6 cyl
File
2 MB BIN, ready to write

Bosch on the VW Passat 3.6 FSI

Software and hardware

Hardware
0261S02625 Bosch's number for the ECU itself, on its label printed 0 261 S02 625
Part number
03H906032DQ Volkswagen's part number for this ECU, printed 03H 906 032 DQ
Software
394385 (1037394385) The software inside: your read must show this number

Check your read against this file

How the Bosch is read: OBD and Bench

  • OBD
  • Bench
  • CMD Flash

Older tools

  • KESS V2

Built on request for the VW Passat 3.6 FSI

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Pops and bangs
  • Anti-lag

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261S02625, part number 03H906032DQ and software 394385
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2008 VW Passat 3.6 FSI (221 kW, 300 hp), for its Bosch ECU with hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Passat 3.6 FSI carries the R36 - 3.6 FSI engine, 300 hp and 350 Nm from the factory. On this engine, Stage 1 usually gives about 320 hp and 370 Nm (+20 hp, +20 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 394385 of the VW Passat 3.6 FSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261S02625 is the number on the Bosch ECU's label. Software 394385 (1037394385) is the calibration inside it: a read with hardware 0261S02625 and another software number needs a different file. Part number 03H906032DQ is the car maker's number for this ECU.

Questions

Which ECU does this VW Passat 3.6 FSI original file fit?

A Bosch ECU with hardware 0261S02625, part number 03H906032DQ and software 394385 (1037394385). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

Over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Passat 3.6 FSI?

Usually about 320 hp and 370 Nm against 300 hp and 350 Nm stock (+20 hp, +20 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read