Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Passat B5
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Passat

Instant download

VW Passat 2.3 V5 Stage 1 file Bosch HW 0261206508 · 071906018AC · SW 352012

1999 · Petrol · 150 hp (110 kW)

Share WhatsApp Facebook

VW / Volkswagen Passat B5 1996–2005

Dyno sheet

Power
160 hp +10
Torque
220 Nm +15
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0050751001501502252003001000200030004000500060007000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 2.3 V5. Results depend on the car's condition, fuel and parts.

Power
150 hp 110 kW
ECU
Bosch
Engine
2.3 V5 Petrol
File
256 KB BIN, ready to write

Bosch on the VW Passat 2.3 V5

Software and hardware

Hardware
0261206508 Bosch's number for the ECU itself, on its label printed 0 261 206 508
Part number
071906018AC Volkswagen's part number for this ECU, printed 071 906 018 AC
Software
352012 (1037352012) The software inside: your read must show this number

Check your read against this file

Built on request for the VW Passat 2.3 V5

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Start/stop off
  • Pops and bangs

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261206508, part number 071906018AC and software 352012
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261206508, part number 071906018AC and software 352012 (1037352012), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the 1999 VW Passat 2.3 V5 (110 kW, 150 hp), for its Bosch ECU with hardware 0261206508, part number 071906018AC and software 352012 (1037352012). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 2.3 V5 refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.

The VW Passat 2.3 V5 carries the 2.3 V5 engine, 150 hp and 205 Nm from the factory. On this engine, Stage 1 usually gives about 160 hp and 220 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 352012 of the VW Passat 2.3 V5 we sell the original, Stage 1 and Stage 2. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.

Read the Bosch ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261206508 is the number on the Bosch ECU's label. Software 352012 (1037352012) is the calibration inside it: a read with hardware 0261206508 and another software number needs a different file. Part number 071906018AC is the car maker's number for this ECU.

Questions

Which ECU does this VW Passat 2.3 V5 Stage 1 file fit?

A Bosch ECU with hardware 0261206508, part number 071906018AC and software 352012 (1037352012). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Passat 2.3 V5?

Usually about 160 hp and 220 Nm against 150 hp and 205 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch ECU file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 256 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read