Instant download
VW Passat 1.6 8V Stage 1 file 3B0906018F
2001 · Petrol · 101 hp (74 kW)
Choose your file
Dyno sheet
- Power
- 112 hp +10
- Torque
- 163 Nm +15
Typical crank figures for a healthy 1.6. Results depend on the car's condition, fuel and parts.
- Power
- 101 hp 74 kW
- Engine
- 1.6 Petrol
- File
- 512 KB BIN, ready to write
The VW Passat 1.6 8V file
- ECU
- Siemens/Continental SIMOS 3
Software and hardware
- Part number
- 3B0906018F Volkswagen's part number for this ECU, printed 3B0 906 018 F
How the ECU is read: OBD and Bench
Older tools
Built on request for the VW Passat 1.6 8V
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 3B0906018F
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 3B0906018F, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2001 VW Passat 1.6 8V (74 kW, 101 hp), for its ECU with part number 3B0906018F. Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 1.6 refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.
The VW Passat 1.6 8V carries the 1.6 engine, 102 hp and 148 Nm from the factory. On this engine, Stage 1 usually gives about 112 hp and 163 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For this calibration of the VW Passat 1.6 8V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Part number 3B0906018F is the car maker's number for this ECU.
Questions
Which ECU does this VW Passat 1.6 8V Stage 1 file fit?
A ECU with part number 3B0906018F. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the ECU read and written?
Over OBD and on the bench, with tools such as CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Passat 1.6 8V?
Usually about 112 hp and 163 Nm against 102 hp and 148 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the ECU file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand