Instant download
VW Golf7 GTI 2.0 TFSI original file Siemens/Continental · 5G0906259 · SW SC800F8300000
2013 · Turbo petrol · 220 hp (162 kW)
Choose your file
Dyno sheet
- Power
- 220 hp
- Torque
- 350 Nm
Typical crank figures for a healthy 2.0 TSI. Results depend on the car's condition, fuel and parts.
- Power
- 220 hp 162 kW
- ECU
- Siemens/Continental
- Engine
- 2.0 TSI Turbo petrol · 1,984 cc · 4 cyl
- File
- 1022 KB BIN, ready to write
Siemens/Continental on the VW Golf7 GTI 2.0 TFSI
- ECU
- Siemens/Continental Simos 18.1
Software and hardware
- Part number
- 5G0906259 Volkswagen's part number for this ECU, printed 5G0 906 259
- Software
- SC800F8300000 The software inside: your read must show this number
How the Siemens/Continental is read: OBD and Bench
Older tools
Built on request for the VW Golf7 GTI 2.0 TFSI
- EGR off
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 5G0906259 and software SC800F8300000
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 5G0906259 and software SC800F8300000, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2013 VW Golf7 GTI 2.0 TFSI (162 kW, 220 hp), for its Siemens/Continental ECU with part number 5G0906259 and software SC800F8300000. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Golf7 GTI 2.0 TFSI carries the 2.0 TSI engine, 220 hp and 350 Nm from the factory.
This file of software SC800F8300000 of the VW Golf7 GTI 2.0 TFSI downloads straight after payment. Another stage of it can be built from your own read by our engineers.
The Siemens/Continental ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport NewGenius, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 TSI engine with the same ECU is fitted to the Skoda Kodiaq I, Skoda Octavia III, Volkswagen Atlas / Teramont, Volkswagen Lamando I, Volkswagen Passat B8, Volkswagen Scirocco III and Volkswagen Tiguan II: their file can be the same, so check the software number of your read.
EGR off, catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software SC800F8300000 is the calibration inside the Siemens/Continental ECU. Part number 5G0906259 is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf7 GTI 2.0 TFSI original file fit?
A Siemens/Continental ECU with part number 5G0906259 and software SC800F8300000. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens/Continental ECU read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport NewGenius and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.
Can you add EGR off and catalyst off to the Siemens/Continental ECU file?
Yes, on request, for off-road and competition use: EGR off, catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 1022 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand