Instant download
VW Golf5 1.6 FSI Stage 1 file Bosch MED9.5.10 HW 0261S02183 · 03C906056CG · SW 376036
2005 · Petrol · 115 hp (85 kW)
Choose your file
Dyno sheet
- Power
- 128 hp +13
- Torque
- 170 Nm +15
Typical crank figures for a healthy 1.6 16V FSI. Results depend on the car's condition, fuel and parts.
- Power
- 115 hp 85 kW
- ECU
- Bosch MED9.5.10
- Engine
- 1.6 16V FSI Petrol · 1,600 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch MED9.5.10 on the VW Golf5 1.6 FSI
Software and hardware
- Hardware
- 0261S02183 Bosch's number for the ECU itself, on its label printed 0 261 S02 183
- Part number
- 03C906056CG Volkswagen's part number for this ECU, printed 03C 906 056 CG
- Software
- 376036 (1037376036) The software inside: your read must show this number
How the Bosch MED9.5.10 is read: OBD and Bench
Older tools
Built on request for the VW Golf5 1.6 FSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261S02183, part number 03C906056CG and software 376036
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261S02183, part number 03C906056CG and software 376036 (1037376036), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2005 VW Golf5 1.6 FSI (85 kW, 115 hp), for its Bosch MED9.5.10 ECU with hardware 0261S02183, part number 03C906056CG and software 376036 (1037376036). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 1.6 16V FSI refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.
The VW Golf5 1.6 FSI carries the 1.6 16V FSI engine, 115 hp and 155 Nm from the factory. On this engine, Stage 1 usually gives about 128 hp and 170 Nm (+13 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 376036 of the VW Golf5 1.6 FSI we sell the original and Stage 1. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch MED9.5.10 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and bFlash. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261S02183 is the number on the Bosch ECU's label. Software 376036 (1037376036) is the calibration inside it: a read with hardware 0261S02183 and another software number needs a different file. Part number 03C906056CG is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf5 1.6 FSI Stage 1 file fit?
A Bosch MED9.5.10 ECU with hardware 0261S02183, part number 03C906056CG and software 376036 (1037376036). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch MED9.5.10 read and written?
Over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Golf5 1.6 FSI?
Usually about 128 hp and 170 Nm against 115 hp and 155 Nm stock (+13 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch MED9.5.10 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand