Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Golf III
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Golf

Instant download

VW Golf3 GTI original file Siemens/Continental SIMOS4 HW 5WP4256 · 037906025R

1997 · Petrol · 115 hp (85 kW)

Share WhatsApp Facebook

VW / Volkswagen Golf III 1992–1998

Dyno sheet

Power
115 hp
Torque
166 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.003875751501132251503001000200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 2.0. Results depend on the car's condition, fuel and parts.

Power
115 hp 85 kW
ECU
Siemens/Continental SIMOS4
Engine
2.0 Petrol
File
128 KB BIN, ready to write

Siemens/Continental SIMOS4 on the VW Golf3 GTI

Software and hardware

Hardware
5WP4256 Siemens/Continental's number for the ECU itself, on its label
Part number
037906025R Volkswagen's part number for this ECU, printed 037 906 025 R

Check your read against this file

Built on request for the VW Golf3 GTI

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 5WP4256 and part number 037906025R
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 5WP4256 and part number 037906025R, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 1997 VW Golf3 GTI (85 kW, 115 hp), for its Siemens/Continental SIMOS4 ECU with hardware 5WP4256 and part number 037906025R. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Golf3 GTI carries the 2.0 engine, 115 hp and 166 Nm from the factory. On this engine, Stage 1 usually gives about 130 hp and 182 Nm (+15 hp, +16 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the VW Golf3 GTI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

Read the Siemens/Continental SIMOS4 ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.

Catalyst off, DTC off and speed limiter (Vmax) off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 5WP4256 is the number on the Siemens/Continental ECU's label. Part number 037906025R is the car maker's number for this ECU.

Questions

Which ECU does this VW Golf3 GTI original file fit?

A Siemens/Continental SIMOS4 ECU with hardware 5WP4256 and part number 037906025R. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Siemens/Continental SIMOS4 read and written?

With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Golf3 GTI?

Usually about 130 hp and 182 Nm against 115 hp and 166 Nm stock (+15 hp, +16 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Siemens/Continental SIMOS4 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 128 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read