Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Golf VI
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Golf

Instant download

VW Golf 6 GTI 2.0 TFSI original file Bosch MED17 HW 0261S04951 · 1K0907115AA · SW 510467

2010 · Turbo petrol · 211 hp (155 kW)

Share WhatsApp Facebook

VW / Volkswagen Golf VI 2008–2014

Dyno sheet

Power
210 hp
Torque
280 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00100150200300300450400600200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 2.0 TSI GTI. Results depend on the car's condition, fuel and parts.

Power
211 hp 155 kW
ECU
Bosch MED17
Engine
2.0 TSI GTI Turbo petrol · 1,984 cc · 4 cyl
File
1.47 MB BIN, ready to write

Bosch MED17 on the VW Golf 6 GTI 2.0 TFSI

Software and hardware

Hardware
0261S04951 Bosch's number for the ECU itself, on its label printed 0 261 S04 951
Part number
1K0907115AA Volkswagen's part number for this ECU, printed 1K0 907 115 AA
Software
510467 (1037510467) The software inside: your read must show this number

Check your read against this file

How the Bosch MED17 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the VW Golf 6 GTI 2.0 TFSI

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Start/stop off
  • Pops and bangs

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261S04951, part number 1K0907115AA and software 510467
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261S04951, part number 1K0907115AA and software 510467 (1037510467), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2010 VW Golf 6 GTI 2.0 TFSI (155 kW, 211 hp), for its Bosch MED17 ECU with hardware 0261S04951, part number 1K0907115AA and software 510467 (1037510467). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Golf 6 GTI 2.0 TFSI carries the 2.0 TSI GTI engine, 210 hp and 280 Nm from the factory. On this engine, Stage 2 usually gives about 275 hp and 400 Nm (+65 hp, +120 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 510467 of the VW Golf 6 GTI 2.0 TFSI we sell the original and Stage 2, each made from the same original read. Every file downloads straight after payment.

The Bosch MED17 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 2.0 TSI GTI engine with the same ECU is fitted to the Volkswagen Eos and Volkswagen Passat CC: their file can be the same, so check the software number of your read.

Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261S04951 is the number on the Bosch ECU's label. Software 510467 (1037510467) is the calibration inside it: a read with hardware 0261S04951 and another software number needs a different file. Part number 1K0907115AA is the car maker's number for this ECU.

Questions

Which ECU does this VW Golf 6 GTI 2.0 TFSI original file fit?

A Bosch MED17 ECU with hardware 0261S04951, part number 1K0907115AA and software 510467 (1037510467). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch MED17 read and written?

Over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 2 give on the VW Golf 6 GTI 2.0 TFSI?

Usually about 275 hp and 400 Nm against 210 hp and 280 Nm stock (+65 hp, +120 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch MED17 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 1.47 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read