Instant download
VW Golf 2.0 TDI Stage 3 file Bosch · 03G906021AB · SW 390603
2007 · Turbo diesel · 140 hp (103 kW)
Choose your file
Dyno sheet
- Power
- 140 hp
- Torque
- 320 Nm
Typical crank figures for a healthy 2.0 TDi DPF. Results depend on the car's condition, fuel and parts.
- Power
- 140 hp 103 kW
- ECU
- Bosch
- Engine
- 2.0 TDi DPF Turbo diesel
- File
- 2 MB BIN, ready to write
Bosch on the VW Golf 2.0 TDI
- ECU
- Bosch EDC16U1
Software and hardware
- Part number
- 03G906021AB Volkswagen's part number for this ECU, printed 03G 906 021 AB
- Software
- 390603 (1037390603) The software inside: your read must show this number
How the Bosch is read: OBD and Bench
Older tools
Built on request for the VW Golf 2.0 TDI
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03G906021AB and software 390603
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03G906021AB and software 390603 (1037390603), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 3 file is
This is a Stage 3 tune of the factory calibration of the 2007 VW Golf 2.0 TDI (103 kW, 140 hp), for its Bosch ECU with part number 03G906021AB and software 390603 (1037390603). Stage 3 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Stage 3 on the 2.0 TDi DPF is written for a built engine: a bigger turbo, injectors and fuel supply matched to it, and supporting parts. If your build differs, send us the list and we match the file to it.
The VW Golf 2.0 TDI carries the 2.0 TDi DPF engine, 140 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 175 hp and 380 Nm (+35 hp, +60 Nm); Stage 2 usually gives about 185 hp and 390 Nm (+45 hp, +70 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 390603 of the VW Golf 2.0 TDI we sell the original, Stage 1, Stage 2 and Stage 3, each made from the same original read. Every file downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 390603 (1037390603) is the calibration inside the Bosch ECU. Part number 03G906021AB is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf 2.0 TDI Stage 3 file fit?
A Bosch ECU with part number 03G906021AB and software 390603 (1037390603). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Golf 2.0 TDI?
Usually about 175 hp and 380 Nm against 140 hp and 320 Nm stock (+35 hp, +60 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch ECU file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the VW Golf 2.0 TDI?
Stage 1, about 175 hp and 380 Nm, is for a standard car. Stage 2, about 185 hp and 390 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand