Stage 3
Stage 3 · Diesel · 2.5 TDI 109hp
VW Crafter 2.5 TDI Stage 3 file Bosch HW 0281013700 · 074906032 · SW 383306
Volkswagen Crafter 2.5 TDI Turbo Diesel 80.2 kW (109 HP) Stage 32002, Turbo diesel, 80.2 kW (109 hp)
109 → 174 HP +65 HP +154 Nm 60% more power
Calibrated ECU file for 0281013700 (SW 383306). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 TDI 109hp, BJK, 2.5L, Diesel. Engine #7567 in our gains database.
- Power
- 174 HP+65 HP from 109
- Torque
- 434 Nm+154 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281013700 and software 383306.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Diesel.
Hardware
- Hybrid or larger turbocharger
- Upgraded injectors (matched flow rate)
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volkswagen |
|---|---|
| Vehicle model | Crafter |
| Model year | 2002 |
| Displacement | 2.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 80.2 kW (109 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281013700 |
| ECU software | 383306 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 2461 CC |
| Compression ratio | 16,8 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | BJK |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 109 HP | 280 Nm | — | — |
| Stage 1 | 140 HP | 350 Nm | +31 (28.4%) | +70 |
| Stage 2 | 166 HP | 350 Nm | +57 (52.3%) | +70 |
| Stage 3 | 174 HP | 434 Nm | +65 (59.6%) | +154 |
| Stage 4 | 196 HP | 518 Nm | +87 (79.8%) | +238 |
About this calibration file
The Stage 3 calibration for the 2002 Volkswagen Crafter 2.5L Turbo Diesel targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0281013700 and software version 383306. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 174 HP and 434 Nm at the crank — a gain of +65 HP (60%) and +154 Nm over the factory 109 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281013700 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for VW Crafter 2.5 TDI 2002 Turbodiesel 80.2KW with Bosch 0281013700 (Bosch software number 383306 ( 1037383306 )). The base stock vehicle for this calibration has a factory output of around 80.2 kW (~109 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281013700, 383306 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F7BCC628 1FEB438D 5F174CCF 51D2224B 8E957638 4E6E4A4B 392230EA F102B00A