Original file
Original / Factory · Diesel · 2.0 TDI CR 109hp
VW Crafter 2.0 TDI CR original file Bosch · 03L906012A · SW 536229
Volkswagen Crafter 2.0 TDI CR Turbo Diesel 80.2 kW (109 HP) Original2011, Turbo diesel, 80.2 kW (109 hp)
109 HP Factory calibration Stock backup file, 300 Nm, Diesel
Calibrated ECU file for 03L906012A (SW 536229). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDI CR 109hp, CKTB, 2L, Diesel. Engine #7574 in our gains database.
- Power
- 109 HPfactory calibration
- Torque
- 300 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03L906012A and software 536229.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volkswagen |
|---|---|
| Vehicle model | Crafter |
| Model year | 2011 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 80.2 kW (109 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 03L906012A |
| ECU software | 536229 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1968 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | CKTB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 109 HP | 300 Nm | — | — |
| Stage 1 | 140 HP | 350 Nm | +31 (28.4%) | +50 |
| Stage 2 | 166 HP | 350 Nm | +57 (52.3%) | +50 |
| Stage 3 | 174 HP | 465 Nm | +65 (59.6%) | +165 |
| Stage 4 | 196 HP | 555 Nm | +87 (79.8%) | +255 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 Volkswagen Crafter 2.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 03L906012A and software version 536229. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03L906012A (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for VW Crafter 2.0 TDI CR 2011 Turbo-Diesel 80.2KW with Bosch 03L906012A (Bosch software number 536229 ( 1037536229 )). This original file corresponds to a factory engine output of approximately 80.2 kW (~109 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03L906012A, 536229 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
24C80A47 26C98AC8 7079C9B3 EA23DE01 8EBCB036 6C1CB874 51E58A26 A4215574