Stage 2
Stage 2 · Diesel · 2.4 D5 185hp
Volvo XC70 D5 Stage 2 file Bosch · SW 393103
Volvo XC70 D5 Turbo Diesel 136.1 kW (185 HP) Stage 22008, Turbo diesel, 136.1 kW (185 hp)
185 → 232 HP +47 HP +75 Nm 25% more power
Calibrated ECU file for (SW 393103). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.4 D5 185hp, D5244T4, 2.4L, Diesel. Engine #8483 in our gains database.
- Power
- 232 HP+47 HP from 185
- Torque
- 475 Nm+75 Nm from 400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 393103 and software 393103.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | Xc70 D5 |
| Model year | 2008 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 136.1 kW (185 HP) |
| ECU manufacturer | Bosch |
| ECU software | 393103 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 2400 CC |
| Compression ratio | 17,3 : 1 |
| Bore × Stroke | 81,0 X 93,2 mm |
| OEM engine code | D5244T4 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 185 HP | 400 Nm | — | — |
| Stage 1 | 225 HP | 480 Nm | +40 (21.6%) | +80 |
| Stage 2 | 232 HP | 475 Nm | +47 (25.4%) | +75 |
| Stage 3 | 278 HP | 620 Nm | +93 (50.3%) | +220 |
| Stage 4 | 333 HP | 740 Nm | +148 (80%) | +340 |
About this calibration file
The Stage 2 calibration for the 2008 Volvo Xc70 D5 Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU and software version 393103. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 232 HP and 475 Nm at the crank — a gain of +47 HP (25%) and +75 Nm over the factory 185 HP / 400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Volvo XC70 D5 2008 Turbodiesel 136.1KW with Bosch 393103. The base stock vehicle for this calibration has a factory output of around 136.1 kW (~185 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 393103. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
36DAA75F 4383AEA9 3D770904 9B7D7B70 0BC12ABE 17BA57C0 C19EA7A6 91B71DB5