Stage 1
Stage 1 · Diesel · FM 13 300 9.4L I6 295hp
Volvo Truck FM9 300 Stage 1 file
Volvo Truck FM9 300 Turbo Diesel 220.6 kW (300 HP) Lukas Stage 12002, Turbo diesel, 220.6 kW (300 hp)
295 → 364 HP +69 HP +142 Nm 23% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: FM 13 300 9.4L I6 295hp, D9B, 9.4L, Diesel. Engine #18557 in our gains database.
- Power
- 364 HP+69 HP from 295
- Torque
- 830 Nm+142 Nm from 688
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | Truck Fm9 300 |
| Model year | 2002 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 220.6 kW (300 HP) |
| Calibration stage | Stage 1 |
| OEM engine code | D9B |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 295 HP | 688 Nm | — | — |
| Stage 1 | 364 HP | 830 Nm | +69 (23.4%) | +142 |
| Stage 2 | 419 HP | 1011 Nm | +124 (42%) | +323 |
| Stage 3 | 443 HP | 1066 Nm | +148 (50.2%) | +378 |
| Stage 4 | 531 HP | 1273 Nm | +236 (80%) | +585 |
About this calibration file
The Stage 1 calibration for the 2002 Volvo Truck Fm9 300 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 364 HP and 830 Nm at the crank — a gain of +69 HP (23%) and +142 Nm over the factory 295 HP / 688 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Volvo Truck FM9 300 2002 Turbodiesel 220.6KW Lukas . The base stock vehicle for this calibration has a factory output of around 220.6 kW (~300 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
336A19A6 FB95BDFE 0BD068EF F4DF5EF1 61C066F1 05CC6410 358525DF 70BF2DBC