Stage 1
Stage 1 · Diesel · 2.4 D5 185hp
Volvo S80 2.4 D5 Stage 1 file Bosch · SW 393132
Volvo S80 2.4 D5 Turbo Diesel 136.1 kW (185 HP) Stage 12008, Turbo diesel, 136.1 kW (185 hp)
185 → 220 HP +35 HP +60 Nm 19% more power
Calibrated ECU file for (SW 393132). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.4 D5 185hp, D5244T2, 2.4L, Diesel. Engine #8259 in our gains database.
- Power
- 220 HP+35 HP from 185
- Torque
- 460 Nm+60 Nm from 400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 393132.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | S80 |
| Model year | 2008 |
| Displacement | 2.4 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 136.1 kW (185 HP) |
| ECU manufacturer | Bosch |
| ECU software | 393132 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2400 CC |
| Compression ratio | 17,3 : 1 |
| Bore × Stroke | 81,0 X 93,2 mm |
| OEM engine code | D5244T2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 185 HP | 400 Nm | — | — |
| Stage 1 | 220 HP | 460 Nm | +35 (18.9%) | +60 |
| Stage 2 | 232 HP | 475 Nm | +47 (25.4%) | +75 |
| Stage 3 | 278 HP | 620 Nm | +93 (50.3%) | +220 |
| Stage 4 | 333 HP | 740 Nm | +148 (80%) | +340 |
About this calibration file
The Stage 1 calibration for the 2008 Volvo S80 2.4L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 393132. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 220 HP and 460 Nm at the crank — a gain of +35 HP (19%) and +60 Nm over the factory 185 HP / 400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Volvo S80 2.4 D5 2008 Turbodiesel 136.1KW with Bosch Bosch (Bosch software number 393132 ( 1037393132 )). The base stock vehicle for this calibration has a factory output of around 136.1 kW (~185 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 393132 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
7C990BBF AE758188 F6589E8C 5EC9102F 3AEA1C48 548978F9 D1E23F2F 79E42245