Original file
Original / Factory · Petrol · 1.0 Turbo 84hp
Smart ForTwo 1.0 T original file Bosch · SW 399228
Smart ForTwo 1.0 T Turbo Petrol 61.8 kW (84 HP) Original2008, Turbo petrol, 61.8 kW (84 hp)
84 HP Factory calibration Stock backup file, 120 Nm, Petrol
Calibrated ECU file for (SW 399228). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.0 Turbo 84hp, M132.930, 1L, Petrol. Engine #7108 in our gains database.
- Power
- 84 HPfactory calibration
- Torque
- 120 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware INFO and software 399228.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Smart |
|---|---|
| Vehicle model | Fortwo |
| Model year | 2008 |
| Displacement | 1.0 L |
| Fuel / Induction | Petrol |
| Factory power | 61.8 kW (84 HP) |
| ECU manufacturer | Bosch |
| ECU software | 399228 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 999 CC |
| Compression ratio | 10,0 : 1 |
| Bore × Stroke | 72,0 X 81,8 mm |
| OEM engine code | M132.930 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 84 HP | 120 Nm | — | — |
| Stage 1 | 115 HP | 165 Nm | +31 (36.9%) | +45 |
| Stage 2 | 122 HP | 173 Nm | +38 (45.2%) | +53 |
| Stage 3 | 139 HP | 186 Nm | +55 (65.5%) | +66 |
| Stage 4 | 164 HP | 222 Nm | +80 (95.2%) | +102 |
About this calibration file
This is the factory (original) ECU calibration for the 2008 Smart Fortwo 1.0L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 399228. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Smart ForTwo 1.0 T 2008 Turbo-Benzin 61.8KW with Bosch INFO (Bosch software number 399228 ( 1037399228 )). This original file corresponds to a factory engine output of approximately 61.8 kW (~84 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as INFO, 399228 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E90158BE 266ED58B 211FA4A4 76341951 E6E84581 C3CA1087 4F6ED894 3B7CC077