Stage 1
Stage 1 · Diesel · 0.8 CDI 41hp
Smart ForTwo 0.8 CDI Stage 1 file Bosch HW 0281010161 · SW 365278
Smart ForTwo 0.8 CDI Turbo Diesel 30.2 kW (41 HP) Stage 12002, Turbo diesel, 30.2 kW (41 hp)
41 → 49 HP +8 HP +22 Nm 20% more power
Calibrated ECU file for 0281010161 (SW 365278). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 0.8 CDI 41hp, M660.950, 0.8L, Diesel. Engine #7105 in our gains database.
- Power
- 49 HP+8 HP from 41
- Torque
- 122 Nm+22 Nm from 100
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010161 and software 365278.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Smart |
|---|---|
| Vehicle model | Fortwo |
| Model year | 2002 |
| Displacement | 0.8 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 30.2 kW (41 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010161 |
| ECU software | 365278 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 799 CC |
| Compression ratio | 18,5 : 1 |
| Bore × Stroke | 65,5 X 79,0 mm |
| OEM engine code | M660.950 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 41 HP | 100 Nm | — | — |
| Stage 1 | 49 HP | 122 Nm | +8 (19.5%) | +22 |
| Stage 2 | 51 HP | 127 Nm | +10 (24.4%) | +27 |
| Stage 3 | 62 HP | 155 Nm | +21 (51.2%) | +55 |
| Stage 4 | 74 HP | 185 Nm | +33 (80.5%) | +85 |
About this calibration file
The Stage 1 calibration for the 2002 Smart Fortwo 0.8L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281010161 and software version 365278. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 49 HP and 122 Nm at the crank — a gain of +8 HP (20%) and +22 Nm over the factory 41 HP / 100 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010161 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Smart ForTwo 0.8 CDI 2002 Turbo-Diesel 30.2KW with Bosch 0281010161 (Bosch software number 365278 ( 1037365278 )). The base stock vehicle for this calibration has a factory output of around 30.2 kW (~41 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010161, 365278 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
04E9D5E2 943B71B3 B7F66169 AB60DDF9 5140ECB4 2DBC087F 934C1E46 28BE6489