Original file
Original / Factory · Diesel · 1.6 TDI CR 105hp
Skoda Octavia 3 1.6 TDI CR original file Bosch · 04L906021M · SW 538357
Skoda Octavia 3 1.6 TDI CR Turbo Diesel 77.2 kW (105 HP) OriginalTurbo diesel, 77.2 kW (105 hp)
105 HP Factory calibration Stock backup file, 250 Nm, Diesel
Calibrated ECU file for 04L906021M (SW 538357). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 TDI CR 105hp, CLHA, 1.6L, Diesel. Engine #6985 in our gains database.
- Power
- 105 HPfactory calibration
- Torque
- 250 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 04L906021M and software 538357.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Skoda |
|---|---|
| Vehicle model | Octavia |
| Displacement | 3.1 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 77.2 kW (105 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 04L906021M |
| ECU software | 538357 |
| Calibration stage | Original (Factory) |
| OEM engine code | CLHA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 105 HP | 250 Nm | — | — |
| Stage 1 | 150 HP | 330 Nm | +45 (42.9%) | +80 |
| Stage 2 | 155 HP | 340 Nm | +50 (47.6%) | +90 |
| Stage 3 | 163 HP | 388 Nm | +58 (55.2%) | +138 |
| Stage 4 | 189 HP | 463 Nm | +84 (80%) | +213 |
About this calibration file
This is the factory (original) ECU calibration for the Skoda Octavia 3.1L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 04L906021M and software version 538357. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
04L906021M (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Skoda Octavia 3 1.6 TDI CR Turbo-Diesel 77.2KW with Bosch 04L906021M (Bosch software number 538357 ( 1037538357 )). This original file corresponds to a factory engine output of approximately 77.2 kW (~105 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 04L906021M, 538357 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
540E17E4 7E19D04F 29B0181A 5200C4E0 0698AFEA 9E4B2D43 B7D7EE15 4D2720E1