Stage 1
Stage 1 · Diesel · 1.6 TDI CR 105hp
Skoda Octavia 2 1.6 TDI CR Stage 1 file Bosch · 04L906021N · SW 538356
Skoda Octavia 2 1.6 TDI CR Turbo Diesel 77.2 kW (105 HP) Stage 12014, Turbo diesel, 77.2 kW (105 hp)
105 → 150 HP +45 HP +80 Nm 43% more power
Calibrated ECU file for 04L906021N (SW 538356). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 TDI CR 105hp, CLHA, 1.6L, Diesel. Engine #6985 in our gains database.
- Power
- 150 HP+45 HP from 105
- Torque
- 330 Nm+80 Nm from 250
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 04L906021N and software 538356.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Skoda |
|---|---|
| Vehicle model | Octavia |
| Model year | 2014 |
| Displacement | 2.1 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 77.2 kW (105 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 04L906021N |
| ECU software | 538356 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1598 CC |
| Compression ratio | 16,2 : 1 |
| Bore × Stroke | 79,5 X 80,5 mm |
| OEM engine code | CLHA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 105 HP | 250 Nm | — | — |
| Stage 1 | 150 HP | 330 Nm | +45 (42.9%) | +80 |
| Stage 2 | 155 HP | 340 Nm | +50 (47.6%) | +90 |
| Stage 3 | 163 HP | 388 Nm | +58 (55.2%) | +138 |
| Stage 4 | 189 HP | 463 Nm | +84 (80%) | +213 |
About this calibration file
The Stage 1 calibration for the 2014 Skoda Octavia 2.1L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 04L906021N and software version 538356. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 150 HP and 330 Nm at the crank — a gain of +45 HP (43%) and +80 Nm over the factory 105 HP / 250 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
04L906021N (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Skoda Octavia 2 1.6 TDI CR 2014 Turbo-Diesel 77.2KW with Bosch 04L906021N (Bosch software number 538356 ( 1037538356 )). The base stock vehicle for this calibration has a factory output of around 77.2 kW (~105 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 04L906021N, 538356 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
FA491B21 E4958F50 E22982FF CF012975 0EB1E238 20BF291A BDC57FAF 653375D5