Stage 1
Stage 1 · Petrol · 1.4 TSi 150hp (CHPB)
Skoda Octavia 1.8 T Stage 1 file Bosch HW 0261207436 · 06A906032HJ · SW 366426
Skoda Octavia 1.8 T Turbo Petrol 110.3 kW (150 HP) Stage 1Turbo petrol, 110.3 kW (150 hp)
150 → 180 HP +30 HP +60 Nm 20% more power
Calibrated ECU file for 0261207436 (SW 366426). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.4 TSi 150hp (CHPB), CHPB, 1.4L, Petrol. Engine #6995 in our gains database.
- Power
- 180 HP+30 HP from 150
- Torque
- 310 Nm+60 Nm from 250
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207436 and software 366426.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Skoda |
|---|---|
| Vehicle model | Octavia |
| Displacement | 1.8 L |
| Fuel / Induction | Petrol |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261207436 |
| ECU software | 366426 |
| Calibration stage | Stage 1 |
| OEM engine code | CHPB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 250 Nm | — | — |
| Stage 1 | 180 HP | 310 Nm | +30 (20%) | +60 |
| Stage 2 | 191 HP | 326 Nm | +41 (27.3%) | +76 |
| Stage 3 | 248 HP | 388 Nm | +98 (65.3%) | +138 |
| Stage 4 | 293 HP | 463 Nm | +143 (95.3%) | +213 |
About this calibration file
The Stage 1 calibration for the Skoda Octavia 1.8L Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261207436 and software version 366426. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 180 HP and 310 Nm at the crank — a gain of +30 HP (20%) and +60 Nm over the factory 150 HP / 250 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207436 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Skoda Octavia 1.8 T Turbo-Benzin 110.3KW with Bosch 0261207436 and software ID 06A906032HJ (Bosch software number 366426 ( 1037366426 )). The base stock vehicle for this calibration has a factory output of around 110.3 kW (~150 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207436, 06A906032HJ, 366426 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
96E71244 511AA2C5 093DCF1C 51A6D9AF 3FC05158 F98A5CF6 79BE963C C849E1AD