Stage 3
Stage 3 · Petrol · 2.0 TFSI RS 200hp
Skoda New Octavia 2.0 TFSI Stage 3 file Bosch HW 0261S02339 · 1Z0907115A · SW 381208
Skoda New Octavia 2.0 TFSI Turbo Petrol 147.1 kW (200 HP) Stage 32007, Turbo petrol, 147.1 kW (200 hp)
200 → 300 HP +100 HP +170 Nm 50% more power
Calibrated ECU file for 0261S02339 (SW 381208). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TFSI RS 200hp, BWA, 2L, Petrol. Engine #6978 in our gains database.
- Power
- 300 HP+100 HP from 200
- Torque
- 450 Nm+170 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261S02339 and software 381208.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Petrol.
Hardware
- Hybrid or larger turbocharger
- Upgraded high-pressure fuel pump and / or injectors
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Skoda |
|---|---|
| Vehicle model | New Octavia |
| Model year | 2007 |
| Displacement | 2.0 L |
| Fuel / Induction | TFSI (Turbo Petrol) |
| Factory power | 147.1 kW (200 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 1Z0907115A |
| ECU hardware | 0261S02339 |
| ECU software | 381208 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 1984 CC |
| Compression ratio | 9,6 : 1 |
| Bore × Stroke | 82,5 X 92,8 mm |
| OEM engine code | BWA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 200 HP | 280 Nm | — | — |
| Stage 1 | 260 HP | 380 Nm | +60 (30%) | +100 |
| Stage 2 | 275 HP | 400 Nm | +75 (37.5%) | +120 |
| Stage 3 | 300 HP | 450 Nm | +100 (50%) | +170 |
| Stage 4 | 390 HP | 518 Nm | +190 (95%) | +238 |
About this calibration file
The Stage 3 calibration for the 2007 Skoda New Octavia 2.0L TFSI (Turbo Petrol) targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0261S02339 and software version 381208. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 300 HP and 450 Nm at the crank — a gain of +100 HP (50%) and +170 Nm over the factory 200 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S02339 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for Skoda New Octavia 2.0 TFSI 2007 Turbo-Benzin 147.1KW with Bosch 0261S02339 and software ID 1Z0907115A (Bosch software number 381208 ( 1037381208 )). The base stock vehicle for this calibration has a factory output of around 147.1 kW (~200 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S02339, 1Z0907115A, 381208 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
CF1843AC EED618DA A735E1AC D13C4105 5BCBBE5F 76308AB8 80E61CF2 8399A2B8