Instant download
Skoda Fabia 1.6 TDI CR original file Siemens/Continental · 03L906023MG · SW SM2F0L9500000
2011 · Turbo diesel · 90 hp (66 kW)
Choose your file
Dyno sheet
- Power
- 90 hp
- Torque
- 230 Nm
Typical crank figures for a healthy 1.6 TDI. Results depend on the car's condition, fuel and parts.
- Power
- 90 hp 66 kW
- ECU
- Siemens/Continental
- Engine
- 1.6 TDI Turbo diesel · 1,598 cc · 4 cyl
- File
- 492 KB BIN, ready to write
Siemens/Continental on the Skoda Fabia 1.6 TDI CR
- ECU
- Siemens/Continental PCR 2 1
Software and hardware
- Part number
- 03L906023MG Skoda's part number for this ECU, printed 03L 906 023 MG
- Software
- SM2F0L9500000 The software inside: your read must show this number
- Software ID
- CASM2L95.DAT The software's own ID, in the file
How the Siemens/Continental is read: OBD and Bench
Older tools
Built on request for the Skoda Fabia 1.6 TDI CR
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
- Start/stop off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03L906023MG, software SM2F0L9500000 and software ID CASM2L95
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03L906023MG, software SM2F0L9500000 and software ID CASM2L95.DAT, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2011 Skoda Fabia 1.6 TDI CR (66 kW, 90 hp), for its Siemens/Continental ECU with part number 03L906023MG, software SM2F0L9500000 and software ID CASM2L95.DAT. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Skoda Fabia 1.6 TDI CR carries the 1.6 TDI engine, 90 hp and 230 Nm from the factory. On this engine, Stage 1 usually gives about 136 hp and 300 Nm (+46 hp, +70 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software SM2F0L9500000 of the Skoda Fabia 1.6 TDI CR we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Siemens/Continental ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
DPF off, EGR off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software SM2F0L9500000 is the calibration inside the Siemens/Continental ECU. Software ID CASM2L95.DAT names that calibration in your tool's read. Part number 03L906023MG is the car maker's number for this ECU.
Questions
Which ECU does this Skoda Fabia 1.6 TDI CR original file fit?
A Siemens/Continental ECU with part number 03L906023MG, software SM2F0L9500000 and software ID CASM2L95.DAT. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens/Continental ECU read and written?
Over OBD and on the bench, with tools such as Autotuner, CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Skoda Fabia 1.6 TDI CR?
Usually about 136 hp and 300 Nm against 90 hp and 230 Nm stock (+46 hp, +70 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Siemens/Continental ECU file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 492 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
Does software SM2F0L9500000 fit other cars?
We also sell this software for the VW Caddy 1.6 TDI CR, Skoda Yeti 1.6 TDI CR, Skoda superb 1.6 TDI CR and Skoda Rommster 1.6 TDI CR. The hardware number on your ECU decides whether the same file fits: match it before you write.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand