Original file
Original / Factory · Petrol · 1.2 TSI 105hp
Seat Leon 1.2TSI original file Bosch · 03F906070CH · SW 772777
Seat Leon 1.2TSI 77.2 kW (105 HP) Original2011, 77.2 kW (105 hp)
105 HP Factory calibration Stock backup file, 175 Nm, Petrol
Calibrated ECU file for 03F906070CH (SW 772777). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.2 TSI 105hp, CBZ, 1.2L, Petrol. Engine #6813 in our gains database.
- Power
- 105 HPfactory calibration
- Torque
- 175 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03F906070CH and software 772777.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Leon 1 2tsi |
| Model year | 2011 |
| Factory power | 77.2 kW (105 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 03F906070CH |
| ECU software | 772777 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1197 CC |
| Compression ratio | 10,0 : 1 |
| Bore × Stroke | 71,0 X 75,6 mm |
| OEM engine code | CBZ |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 105 HP | 175 Nm | — | — |
| Stage 1 | 140 HP | 225 Nm | +35 (33.3%) | +50 |
| Stage 2 | 148 HP | 236 Nm | +43 (41%) | +61 |
| Stage 3 | 173 HP | 271 Nm | +68 (64.8%) | +96 |
| Stage 4 | 205 HP | 324 Nm | +100 (95.2%) | +149 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 Seat Leon 1 2tsi, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 03F906070CH and software version 772777. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03F906070CH (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Seat Leon 1.2TSI 2011 77.2KW with Bosch 03F906070CH (Bosch software number 772777 ( 1037772777 )). This original file corresponds to a factory engine output of approximately 77.2 kW (~105 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03F906070CH, 772777 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
FA9003F3 4D252878 710E80B8 EBDD8CF9 5D65DE90 901CF331 7E8649C5 3D936693