Stage 1
Stage 1 · Petrol · 1.0 TSI 110hp
Seat Leon 1.2 TSI Stage 1 file Siemens · 03F906070HC
Seat Leon 1.2 TSI Turbo Petrol 77.2 kW (105 HP) Stage 1Turbo petrol, 77.2 kW (105 hp)
110 → 130 HP +20 HP +40 Nm 18% more power
Calibrated ECU file for 03F906070HC. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.0 TSI 110hp, 1L, Petrol. Engine #6859 in our gains database.
- Power
- 130 HP+20 HP from 110
- Torque
- 240 Nm+40 Nm from 200
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03F906070HC.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Leon |
| Displacement | 1.2 L |
| Fuel / Induction | TSI (Turbo Petrol) |
| Factory power | 77.2 kW (105 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 03F906070HC |
| ECU software | SA300O6000000 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 999 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 74,5 X 76,4 mm |
| OEM engine code | 1.0 TSI 110hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 110 HP | 200 Nm | — | — |
| Stage 1 | 130 HP | 240 Nm | +20 (18.2%) | +40 |
| Stage 2 | 154 HP | 290 Nm | +44 (40%) | +90 |
| Stage 3 | 182 HP | 310 Nm | +72 (65.5%) | +110 |
| Stage 4 | 215 HP | 370 Nm | +105 (95.5%) | +170 |
About this calibration file
The Stage 1 calibration for the Seat Leon 1.2L TSI (Turbo Petrol) is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Siemens ECU with hardware number 03F906070HC and software version SA300O6000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 130 HP and 240 Nm at the crank — a gain of +20 HP (18%) and +40 Nm over the factory 110 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03F906070HC (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Seat Leon 1.2 TSI Turbo-Benzin 77.2KW with Siemens 03F906070HC and software ID SA300O6000000. The base stock vehicle for this calibration has a factory output of around 77.2 kW (~105 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03F906070HC, SA300O6000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
19125F7E A369A075 B9C780CD D47EAC4A CA3DC218 57BCA305 115DCC93 EC0FB0BC