Original file
Original / Factory · Petrol · 1.8 TSI 120hp
Seat Exeo 1.8 TSI original file Bosch HW 0261S06017 · 3R0907115D · SW 510684
Seat Exeo 1.8 TSI Turbo Petrol 88.3 kW (120 HP) OriginalTurbo petrol, 88.3 kW (120 hp)
120 HP Factory calibration Stock backup file, 230 Nm, Petrol
Calibrated ECU file for 0261S06017 (SW 510684). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8 TSI 120hp, CDH, 1.8L, Petrol. Engine #6736 in our gains database.
- Power
- 120 HPfactory calibration
- Torque
- 230 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261S06017 and software 510684.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Exeo |
| Displacement | 1.8 L |
| Fuel / Induction | TSI (Turbo Petrol) |
| Factory power | 88.3 kW (120 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 3R0907115D |
| ECU hardware | 0261S06017 |
| ECU software | 510684 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1781 CC |
| Compression ratio | 9,6 : 1 |
| Bore × Stroke | 81,0 X 86,4 mm |
| OEM engine code | CDH |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 120 HP | 230 Nm | — | — |
| Stage 1 | 138 HP | 265 Nm | +18 (15%) | +35 |
| Stage 2 | 146 HP | 278 Nm | +26 (21.7%) | +48 |
| Stage 3 | 198 HP | 357 Nm | +78 (65%) | +127 |
| Stage 4 | 234 HP | 426 Nm | +114 (95%) | +196 |
About this calibration file
This is the factory (original) ECU calibration for the Seat Exeo 1.8L TSI (Turbo Petrol), extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261S06017 and software version 510684. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S06017 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Seat Exeo 1.8 TSI Turbo-Benzin 88.3KW with Bosch 0261S06017 and software ID 3R0907115D (Bosch software number 510684 ( 1037510684 )). This original file corresponds to a factory engine output of approximately 88.3 kW (~120 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S06017, 3R0907115D, 510684 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E586DD56 95F83C12 E429A821 8AE4E0F3 004F0D7A 28558EE9 82FE91D3 1BFA5FF4