Stage 1
Stage 1 · Petrol · GT 2.0 TCE 180hp
Renault Megane III 2.0 16V TCe Stage 1 file
Renault Megane III 2.0 16V TCe Turbo Petrol 132.4 kW (180 HP) 0738RD0010233R 1095RD0010233R Stage 1Turbo petrol, 132.4 kW (180 hp)
180 → 210 HP +30 HP +60 Nm 17% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: GT 2.0 TCE 180hp, F4RT, 2L, Petrol. Engine #6440 in our gains database.
- Power
- 210 HP+30 HP from 180
- Torque
- 360 Nm+60 Nm from 300
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Renault |
|---|---|
| Vehicle model | Megane Iii |
| Displacement | 2.0 L |
| Fuel / Induction | Petrol |
| Factory power | 132.4 kW (180 HP) |
| Calibration stage | Stage 1 |
| OEM engine code | F4RT |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 180 HP | 300 Nm | — | — |
| Stage 1 | 210 HP | 360 Nm | +30 (16.7%) | +60 |
| Stage 2 | 223 HP | 378 Nm | +43 (23.9%) | +78 |
| Stage 3 | 297 HP | 465 Nm | +117 (65%) | +165 |
| Stage 4 | 351 HP | 555 Nm | +171 (95%) | +255 |
About this calibration file
The Stage 1 calibration for the Renault Megane Iii 2.0L Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 210 HP and 360 Nm at the crank — a gain of +30 HP (17%) and +60 Nm over the factory 180 HP / 300 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Renault Megane III 2.0 16V TCe Turbo-Benzin 132.4KW 0738RD0010233R 1095RD0010233R . The base stock vehicle for this calibration has a factory output of around 132.4 kW (~180 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
12EBBFEC 0C0E8198 1CB3F279 4049DB7D 01E00285 F60A3860 33CAA7F7 7BF712A5