Original file
Original / Factory · Petrol · 1.6i 16v 110hp
Renault Megane 1.6 original file Siemens
Renault Megane 1.6 Petrol 78.7 kW (107 HP) Original2001, Petrol, 78.7 kW (107 hp)
110 HP Factory calibration Stock backup file, 148 Nm, Petrol
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6i 16v 110hp, K7M, 1.6L, Petrol. Engine #6420 in our gains database.
- Power
- 110 HPfactory calibration
- Torque
- 148 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware RE10080000000.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Renault |
|---|---|
| Vehicle model | Megane |
| Model year | 2001 |
| Displacement | 1.6 L |
| Fuel / Induction | Petrol |
| Factory power | 78.7 kW (107 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | RE10080000000 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1598 CC |
| Compression ratio | 10,0 : 1 |
| Bore × Stroke | 79,5 X 80,5 mm |
| OEM engine code | K7M |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 110 HP | 148 Nm | — | — |
| Stage 1 | 120 HP | 165 Nm | +10 (9.1%) | +17 |
| Stage 2 | 127 HP | 173 Nm | +17 (15.5%) | +25 |
| Stage 3 | 182 HP | 229 Nm | +72 (65.5%) | +81 |
| Stage 4 | 215 HP | 274 Nm | +105 (95.5%) | +126 |
About this calibration file
This is the factory (original) ECU calibration for the 2001 Renault Megane 1.6L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number RE10080000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
RE10080000000 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Renault Megane 1.6 2001 Benzin 78.7KW with Siemens RE10080000000. This original file corresponds to a factory engine output of approximately 78.7 kW (~107 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as RE10080000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
409F058C 87067C2A 8CBB39B0 8AB3A7DE 7B896E40 804EEF23 51D8F4D3 290E4C69