Stage 2 file Instant download Checksum corrected
Renault Laguna 1.9 DCI Stage 2 file Bosch HW 0281010556 · SW 362720
2002, Turbo diesel, 88.3 kW (120 hp)
Stock 120 hp → Stage 1 150 hp +30 hp +55 Nm
This is a Stage 2 tune of the factory calibration of the 2002 Renault Laguna 1.9 DCI (88.3 kW, 120 hp), for its Bosch ECU with hardware 0281010556 and software 362720 (1037362720). Stage 2 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Not sure it fits? Compare your read with ours before you buy.
Every file for this software
The original and the tunes we sell for software 362720, each made from the same read.
| File | Price | Buy |
|---|---|---|
| Original | £6.99 | Add to cart |
| Stage 1 | £21.99 | Add to cart |
| Stage 2 this page | £24.99 | Add to cart |
Power and torque
1.9 dCi (C008232), diesel
| Power | Torque | Gain | |
|---|---|---|---|
| Stock | 120 hp | 270 Nm | Factory |
| Stage 1 | 150 hp | 325 Nm | +30 hp, +55 Nm |
Typical crank figures for a healthy 1.9 dCi (C008232), shown only for the files on sale here. Results depend on the car's condition, fuel and parts.
About this file
Stage 2 on the 1.9 dCi (C008232) goes further than Stage 1 and expects supporting parts: a freer exhaust or downpipe, a bigger intercooler and a clutch rated for the torque. Fit them first; on a standard car a Stage 2 file asks more than the parts give.
The Renault Laguna 1.9 DCI carries the 1.9 dCi (C008232) engine, 120 hp and 270 Nm from the factory. On this engine, Stage 1 usually gives about 150 hp and 325 Nm (+30 hp, +55 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 362720 of the Renault Laguna 1.9 DCI we sell the original, Stage 1 and Stage 2, each made from the same original read. Every file is checksum corrected and downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as Alientech Kess V2, CMD Flash, Alientech K-Tag, MagicMotorsport FLEX and Dimsport New Genius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 1.9 dCi (C008232) engine with the same ECU is fitted to the Nissan Primera III, Renault Espace IV, Renault Mégane II and Renault Scénic / Grand Scénic II: their file can be the same, so check the software number of your read.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0281010556 is the number on the Bosch ECU's label. Software 362720 (1037362720) is the calibration inside it: a read with hardware 0281010556 and another software number needs a different file.
How the Bosch ECU is read
OBD Bench
Read and written with Alientech Kess V2, CMD Flash, Alientech K-Tag, MagicMotorsport FLEX and Dimsport New Genius.
- Read the ECU and keep the read: it is your way back.
- Match the numbers: hardware 0281010556 and software 362720.
- Pay and download: the file is in your account straight away.
- Write it back the way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0281010556 and software 362720 (1037362720), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
The same engine and ECU in other cars
The 1.9 dCi (C008232) with the same ECU is also fitted to these cars. Check the software number of your read: it decides the file.
- Nissan Primera III 2001–2008
- Renault Espace IV 2002–2014
- Renault Mégane II 2002–2008
- Renault Scénic / Grand Scénic II 2003–2009
Questions
Which ECU does this Renault Laguna 1.9 DCI Stage 2 file fit?
A Bosch ECU with hardware 0281010556 and software 362720 (1037362720). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as Alientech Kess V2, CMD Flash, Alientech K-Tag, MagicMotorsport FLEX and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Renault Laguna 1.9 DCI?
Usually about 150 hp and 325 Nm against 120 hp and 270 Nm stock (+30 hp, +55 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch ECU file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Send your read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 512 KB, checksum corrected and ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: a checksum-corrected BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.