Stage 1
Stage 1 · Petrol · 1.6 THP 150hp
Peugeot 207 1.6 THP 16V Stage 1 file Bosch · SW 393691
Peugeot 207 1.6 THP 16V Turbo Petrol 114.7 kW (156 HP) Stage 12008, Turbo petrol, 114.7 kW (156 hp)
150 → 185 HP +35 HP +60 Nm 23% more power
Calibrated ECU file for (SW 393691). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6 THP 150hp, EP6DT, 1.6L, Petrol. Engine #5836 in our gains database.
- Power
- 185 HP+35 HP from 150
- Torque
- 300 Nm+60 Nm from 240
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 393691 and software 393691.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Peugeot |
|---|---|
| Vehicle model | 207 |
| Model year | 2008 |
| Displacement | 1.6 L |
| Fuel / Induction | THP (Turbo Petrol) |
| Factory power | 114.7 kW (156 HP) |
| ECU manufacturer | Bosch |
| ECU software | 393691 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1598 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 77,0 X 85,8 mm |
| OEM engine code | EP6DT |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 240 Nm | — | — |
| Stage 1 | 185 HP | 300 Nm | +35 (23.3%) | +60 |
| Stage 2 | 205 HP | 320 Nm | +55 (36.7%) | +80 |
| Stage 3 | 248 HP | 372 Nm | +98 (65.3%) | +132 |
| Stage 4 | 293 HP | 444 Nm | +143 (95.3%) | +204 |
About this calibration file
The Stage 1 calibration for the 2008 Peugeot 207 1.6L THP (Turbo Petrol) is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU and software version 393691. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 185 HP and 300 Nm at the crank — a gain of +35 HP (23%) and +60 Nm over the factory 150 HP / 240 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Peugeot 207 1.6 THP 16V 2008 Turbo-Benzin 114.7KW with Bosch 393691. The base stock vehicle for this calibration has a factory output of around 114.7 kW (~156 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 393691. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F04849AD 88933B13 7285EC57 94950A3D 02DA380B F67CAA12 BF7CD001 04B8DCB8