Stage 1
Stage 1 · Petrol · 2.0 Turbo OPC 192hp
Opel Zafira 2.0 Turbo Stage 1 file Bosch HW 0261207448 · SW 362726
Opel Zafira 2.0 Turbo Turbo Petrol 141.2 kW (192 HP) Stage 12003, Turbo petrol, 141.2 kW (192 hp)
192 → 225 HP +33 HP +70 Nm 17% more power
Calibrated ECU file for 0261207448 (SW 362726). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 Turbo OPC 192hp, Z20LET, 2L, Petrol. Engine #5770 in our gains database.
- Power
- 225 HP+33 HP from 192
- Torque
- 320 Nm+70 Nm from 250
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207448 and software 362726.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Zafira |
| Model year | 2003 |
| Displacement | 2.0 L |
| Fuel / Induction | Petrol |
| Factory power | 141.2 kW (192 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261207448 |
| ECU software | 362726 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1998 CC |
| Compression ratio | 8,8 : 1 |
| Bore × Stroke | 86,0 X 86,0 mm |
| OEM engine code | Z20LET |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 192 HP | 250 Nm | — | — |
| Stage 1 | 225 HP | 320 Nm | +33 (17.2%) | +70 |
| Stage 2 | 239 HP | 336 Nm | +47 (24.5%) | +86 |
| Stage 3 | 317 HP | 388 Nm | +125 (65.1%) | +138 |
| Stage 4 | 374 HP | 463 Nm | +182 (94.8%) | +213 |
About this calibration file
The Stage 1 calibration for the 2003 Opel Zafira 2.0L Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261207448 and software version 362726. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 225 HP and 320 Nm at the crank — a gain of +33 HP (17%) and +70 Nm over the factory 192 HP / 250 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207448 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Opel Zafira 2.0 Turbo 2003 Turbo-Benzin 141.2KW with Bosch 0261207448 (Bosch software number 362726 ( 1037362726 )). The base stock vehicle for this calibration has a factory output of around 141.2 kW (~192 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207448, 362726 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E4D243F5 DDF06328 79B2B411 955FF5B1 133D8F09 3BF752C2 4E764037 91EC093B