Original file
Original / Factory · Diesel · 2.0 CDTi 114hp
Opel Vivaro 2.0 CDTi original file Bosch · SW 523095
Opel Vivaro 2.0 CDTi Turbo Diesel 84.6 kW (115 HP) Original2010, Turbo diesel, 84.6 kW (115 hp)
114 HP Factory calibration Stock backup file, 290 Nm, Diesel
Calibrated ECU file for (SW 0281016). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 CDTi 114hp, M9R, 2L, Diesel. Engine #5755 in our gains database.
- Power
- 114 HPfactory calibration
- Torque
- 290 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281016 and software 523095.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Vivaro |
| Model year | 2010 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 84.6 kW (115 HP) |
| ECU manufacturer | Bosch |
| ECU software | 0281016 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1995 CC |
| Compression ratio | 16,05 : 1 |
| Bore × Stroke | 83,0 X 90,4 mm |
| OEM engine code | M9R |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 114 HP | 290 Nm | — | — |
| Stage 1 | 144 HP | 360 Nm | +30 (26.3%) | +70 |
| Stage 2 | 151 HP | 374 Nm | +37 (32.5%) | +84 |
| Stage 3 | 171 HP | 450 Nm | +57 (50%) | +160 |
| Stage 4 | 205 HP | 537 Nm | +91 (79.8%) | +247 |
About this calibration file
This is the factory (original) ECU calibration for the 2010 Opel Vivaro 2.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 0281016. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Opel Vivaro 2.0 CDTi 2010 Turbo-Diesel 84.6KW with Bosch 0281016 (Bosch software number 523095 ( 1037523095 )). This original file corresponds to a factory engine output of approximately 84.6 kW (~115 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281016, 523095 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C6D43FAC 05135287 A81178C4 6BF7DBD9 06517611 36F90416 D66BB470 C46F94A2