ORIGINAL / FACTORY Petrol 2.0 Turbo 170hp

Opel Signum 2.0 Turbo Turbo Petrol 128.7 kW (175 HP) Temic

Opel Signum 2.0 Turbo Turbo Petrol 128.7 kW (175 HP) Temic 12788138 Saab FC0G C FMEP 05 JWA 83i Original
04080120160 1000200030004000500060007000 170 HP +0 265 Nm +0 HP Nm RPM 080160240
Stock Original / Factory HP / Nm projection
170 HP Factory calibration
Stock backup file — 265 Nm · Petrol

Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.

16,293 calibration files in catalog · 9,693 engines · 400+ ECU platforms · Engineering since 2012 · WhatsApp support · < 30 min first response
Performance Projection Engine #6546 · Gains DB
MATCHED ENGINE 2.0 Turbo 170hp Z20NET 2L Petrol Factory
04080120160 1000200030004000500060007000 170 HP +0 265 Nm +0 HP Nm RPM 080160240
Stock Factory HP (left) · Nm (right) · Curve shape typical for this ECU family
Real data from Gains API Dyno curve = typical ECU-family projection Final gains depend on fuel, altitude, wear

Vehicle & ECU specifications

Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.

Vehicle make Opel
Vehicle model Signum
Model year 2007
Displacement 2.0 L
Fuel / Induction Petrol
Factory power 128.7 kW (175 HP)
ECU hardware 12788138
Calibration stage Original (Factory)
Cylinder capacity 1998 CC
Compression ratio 9,5 : 1
Bore × Stroke 86,0 X 86,0 mm
OEM engine code Z20NET
File format BIN / ORI
Checksum Pre-corrected (ready to flash)
Delivery Instant download after payment

Engine performance matrix

Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.

Engine2.0 Turbo 170hp CodeZ20NET Displacement2L Capacity1998 CC Compression9,5 : 1 Bore × Stroke86,0 X 86,0 mm FuelPetrol Engine ID#6546
Stage Power Torque Δ HP Δ Nm
Original / Factory 170 HP 265 Nm — —
Stage 1 200 HP 310 Nm +30 (17.6%) +45
Fuel economy gain (vs. factory map, same driving profile): combined cycle −8% , full-load cruise −12%. Diesel calibrations typically net bigger combined-cycle savings thanks to shorter duty-cycle on low-load driving.

About this calibration file

This is the factory (original) ECU calibration for the 2007 Opel Signum 2.0L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.

This file matches a OEM ECU with hardware number 12788138. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.

The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.

Frequently asked questions

The file is written for the exact ECU hardware 12788138 listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.

Two reasons. First, if your ECU write failed mid-flash and you need a verified stock image to recover from — this file restores the unit to the exact calibration it left the factory with. Second, if you plan to experiment with a tune and want a known-good rollback point that is guaranteed identical to a Opel dealer programming.

Instant. Immediately after payment clears (typically < 30 seconds on Stripe / PayPal), the download link appears in your account dashboard and is also emailed to you. The link is a signed, expiring URL — download it within 24 hours; if it expires, just re-generate from the dashboard at any time.

Pre-corrected. Every tuning file we sell is processed through CHKSuite (our in-house checksum engine) before it reaches your download link. You can flash it directly with KESS, KTAG, AutoTuner, CMD, Dimsport or any other supported tool — no extra checksum step required. A zero-CRC write to a modern Bosch/Siemens/Delphi ECU bricks the unit, so this is non-negotiable.

Contact us on WhatsApp or through the dashboard support thread. Free revisions are included for the same stage on the same ECU — send us a live log (via VCDS, INPA, EcuConnect, OBDeleven or similar) and we'll adjust timing, boost, rail pressure or smoke limits and re-issue the file. A failed flash itself (write aborted, bricked ECU) is recoverable with our Original file and a bench tool.

This product contains a complete original ECU backup (stock file) for Opel Signum 2.0 Turbo 2007 Turbo-Benzin 128.7KW with Temic 12788138 and software ID FC0G. This original file corresponds to a factory engine output of approximately 128.7 kW (~175 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.

All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 12788138, FC0G. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.

SHA-256 fingerprint8BB75905 616E2139 74C0464D 62251E00 D2D0F707 0DAD8B6C 053D11B7 80ABCA52

Same engine — other calibrations

Alternative stages for the same ECU: Opel family