Stage 2
Stage 2 · Diesel · 1.7 DTI 75hp
Opel Corsa-C 1.7d Stage 2 file Delco 97227225
Opel Corsa-C 1.7d Turbo Diesel 55.2 kW (75 HP) Delco 97227225 Delco DLNB Stage 22004, Turbo diesel, 55.2 kW (75 hp)
75 → 100 HP +25 HP +59 Nm 33% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.7 DTI 75hp, Y17DT, 1.7L, Diesel. Engine #5610 in our gains database.
- Power
- 100 HP+25 HP from 75
- Torque
- 224 Nm+59 Nm from 165
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 97227225.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Corsa |
| Model year | 2004 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 55.2 kW (75 HP) |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1686 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 79,0 X 86,0 mm |
| OEM engine code | Y17DT |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 75 HP | 165 Nm | — | — |
| Stage 1 | 95 HP | 215 Nm | +20 (26.7%) | +50 |
| Stage 2 | 100 HP | 224 Nm | +25 (33.3%) | +59 |
| Stage 3 | 113 HP | 256 Nm | +38 (50.7%) | +91 |
| Stage 4 | 135 HP | 305 Nm | +60 (80%) | +140 |
About this calibration file
The Stage 2 calibration for the 2004 Opel Corsa Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 100 HP and 224 Nm at the crank — a gain of +25 HP (33%) and +59 Nm over the factory 75 HP / 165 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Opel Corsa-C 1.7d 2004 Turbodiesel 55.2KW with Delco 97227225. The base stock vehicle for this calibration has a factory output of around 55.2 kW (~75 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 97227225. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
591DD8BE 60D1CD1A 45B5D23E 3B5FDB48 9C97DF1F C23039D7 861C1549 3432F317