Stage 1
Stage 1 · Diesel · 2.0 CDTi 160hp
Opel Astra G Stage 1 file Siemens · SW 072085
Opel Astra G 117.7 kW (160 HP) Stage 12004, 117.7 kW (160 hp)
160 → 200 HP +40 HP +70 Nm 25% more power
Calibrated ECU file for (SW 072085). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 CDTi 160hp, A20DTH, 2L, Diesel. Engine #5578 in our gains database.
- Power
- 200 HP+40 HP from 160
- Torque
- 420 Nm+70 Nm from 350
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 072085 and software 072085.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Astra |
| Model year | 2004 |
| Factory power | 117.7 kW (160 HP) |
| ECU manufacturer | Siemens |
| ECU software | 072085 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1956 CC |
| Compression ratio | 16,5 : 1 |
| Bore × Stroke | 83,0 X 90,4 mm |
| OEM engine code | A20DTH |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 160 HP | 350 Nm | — | — |
| Stage 1 | 200 HP | 420 Nm | +40 (25%) | +70 |
| Stage 2 | 210 HP | 437 Nm | +50 (31.3%) | +87 |
| Stage 3 | 240 HP | 543 Nm | +80 (50%) | +193 |
| Stage 4 | 288 HP | 648 Nm | +128 (80%) | +298 |
About this calibration file
The Stage 1 calibration for the 2004 Opel Astra is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Siemens ECU and software version 072085. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 200 HP and 420 Nm at the crank — a gain of +40 HP (25%) and +70 Nm over the factory 160 HP / 350 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Opel Astra G 2004 117.7KW with Siemens 072085. The base stock vehicle for this calibration has a factory output of around 117.7 kW (~160 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 072085. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
B3879583 26439F93 D808300C 8FC5A267 334D6A66 C0283166 0357BA44 766FA3CB