Instant download
Opel Astra-G 2.0 16V Stage 1 file Siemens · SIMTEC70 · SW 072082
2000 · Petrol · 136 hp (100 kW)
Choose your file
Dyno sheet
- Power
- 150 hp +14
- Torque
- 210 Nm +20
Typical crank figures for a healthy 2.0 16v. Results depend on the car's condition, fuel and parts.
- Power
- 136 hp 100 kW
- ECU
- Siemens
- Engine
- 2.0 16v Petrol
- File
- 112 KB BIN, ready to write
Siemens on the Opel Astra-G 2.0 16V
Software and hardware
- Software
- 072082 (1037072082) The software inside: your read must show this number
- Software ID
- SIMTEC70 The software's own ID, in the file
- ECU number
- 90520859 The ECU's own number, on its label
Built on request for the Opel Astra-G 2.0 16V
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberssoftware 072082, software ID SIMTEC70 and ECU number 90520859
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows software 072082 (1037072082), software ID SIMTEC70 and ECU number 90520859, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2000 Opel Astra-G 2.0 16V (100 kW, 136 hp), for its Siemens ECU with software 072082 (1037072082), software ID SIMTEC70 and ECU number 90520859. Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 2.0 16v refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.
The Opel Astra-G 2.0 16V carries the 2.0 16v engine, 136 hp and 190 Nm from the factory. On this engine, Stage 1 usually gives about 150 hp and 210 Nm (+14 hp, +20 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 072082 of the Opel Astra-G 2.0 16V we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
Read the Siemens ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off and speed limiter (Vmax) off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 072082 (1037072082) is the calibration inside the Siemens ECU. Software ID SIMTEC70 names that calibration in your tool's read. ECU number 90520859 is how this Siemens ECU identifies itself.
Questions
Which ECU does this Opel Astra-G 2.0 16V Stage 1 file fit?
A Siemens ECU with software 072082 (1037072082), software ID SIMTEC70 and ECU number 90520859. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens ECU read and written?
With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Opel Astra-G 2.0 16V?
Usually about 150 hp and 210 Nm against 136 hp and 190 Nm stock (+14 hp, +20 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Siemens ECU file?
Yes, on request, for off-road and competition use: catalyst off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 112 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand