Stage 4
Mitsubishi Eclipse 2.0 16V Stage 4 file Mitsubishi
Stage 41995, Petrol
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Eclipse.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 4.
Hardware
- Built / forged engine internals
- Large performance turbocharger
- Uprated HPFP + race-spec injectors (often dual-pump)
- Race intercooler + chargecooler upgrade
- Full performance exhaust
- Reinforced clutch / uprated gearbox
- Optional: E85 / methanol fuel system
Software / calibration
- Fully bespoke calibration: typically dyno-tuned on installed hardware
- Fuelling rebuilt around race injectors / HPFP / E85 blend
- Boost, ignition / injection timing and lambda targeted to the build
- Closed-loop safeties retuned around the actual hardware envelope
Stage 4 is a fully built setup: figures shown are a typical envelope. The file is dyno-tuned to your specific hardware spec.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mitsubishi |
|---|---|
| Vehicle model | Eclipse |
| Model year | 1995 |
| Displacement | 2.0 L |
| Fuel / Induction | Petrol |
| ECU manufacturer | Mitsubishi |
| Calibration stage | Stage 4 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
About this calibration file
The Stage 4 calibration for the 1995 Mitsubishi Eclipse 2.0L Petrol is a built-engine tune. It assumes forged internals, large-frame turbo, upgraded transmission or clutch, and a standalone pre-tune dyno pass. The file is meant as a safe starting map for a professional tuner's in-car refinement.
This file matches a Mitsubishi ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage4 tuning file for Mitsubishi Eclipse 2.0 16V 1995 Benzin KW Mitsubishi with Mitsubishi Eclipse and software ID 16V. This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Eclipse, 16V. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
778541B7 D49BE4C4 3A675266 C853535B 7B7119CC 5EF1C277 A06841F9 E94F97F3