Original file
Original / Factory · Diesel · 115 CDI 150hp
MB Vito 220CDI original file Bosch · SW 376834
Mercedes-Benz Vito 220CDI Turbo Diesel 110.3 kW (150 HP) Original2005, Turbo diesel, 110.3 kW (150 hp)
150 HP Factory calibration Stock backup file, 330 Nm, Diesel
Calibrated ECU file for (SW 376834). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 115 CDI 150hp, OM646 DE 22 LA, 2.1L, Diesel. Engine #4993 in our gains database.
- Power
- 150 HPfactory calibration
- Torque
- 330 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 203WA and software 376834.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito 220cdi |
| Model year | 2005 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 110.3 kW (150 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | CR30-646-C5D4-203WA-110KW-EU4OP-ME-1105×016 |
| ECU software | 376834 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2143 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 88,0 X 88,3 mm |
| OEM engine code | OM646 DE 22 LA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 330 Nm | — | — |
| Stage 1 | 180 HP | 400 Nm | +30 (20%) | +70 |
| Stage 2 | 189 HP | 416 Nm | +39 (26%) | +86 |
| Stage 3 | 225 HP | 512 Nm | +75 (50%) | +182 |
| Stage 4 | 270 HP | 611 Nm | +120 (80%) | +281 |
About this calibration file
This is the factory (original) ECU calibration for the 2005 Mercedes-Benz Vito 220cdi Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number CR30-646-C5D4-203WA-110KW-EU4OP-ME-1105×016 and software version 376834. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
CR30-646-C5D4-203WA-110KW-EU4OP-ME-1105×016 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB Vito 220CDI 2005 Turbodiesel 110.3KW with Bosch CR30-646-C5D4-203WA-110kW-EU4OP-ME-1105×016 (Bosch software number 376834 ( 1037376834 )). This original file corresponds to a factory engine output of approximately 110.3 kW (~150 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as CR30-646-C5D4-203WA-110kW-EU4OP-ME-1105×016, 376834 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
3425212C EF657A25 1EAB35E7 70FB1916 09BE7D51 D5E9A95E 463D927C 00DC8AC1