Stage 2
Stage 2 · Diesel · 112 CDI 122hp
MB Vito 2.2 CDI Stage 2 file Bosch · SW 383370
Mercedes-Benz Vito 2.2 CDI Turbo Diesel 85.3 kW (116 HP) Stage 22006, Turbo diesel, 85.3 kW (116 hp)
122 → 153 HP +31 HP +81 Nm 25% more power
Calibrated ECU file for (SW 383370). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 112 CDI 122hp, OM611.980, 2.2L, Diesel. Engine #4991 in our gains database.
- Power
- 153 HP+31 HP from 122
- Torque
- 381 Nm+81 Nm from 300
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Bosch and software 383370.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito |
| Model year | 2006 |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 85.3 kW (116 HP) |
| ECU manufacturer | Bosch |
| ECU software | 383370 |
| Calibration stage | Stage 2 |
| OEM engine code | OM611.980 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 300 Nm | — | — |
| Stage 1 | 146 HP | 366 Nm | +24 (19.7%) | +66 |
| Stage 2 | 153 HP | 381 Nm | +31 (25.4%) | +81 |
| Stage 3 | 183 HP | 465 Nm | +61 (50%) | +165 |
| Stage 4 | 220 HP | 555 Nm | +98 (80.3%) | +255 |
About this calibration file
The Stage 2 calibration for the 2006 Mercedes-Benz Vito 2.2L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU and software version 383370. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 153 HP and 381 Nm at the crank — a gain of +31 HP (25%) and +81 Nm over the factory 122 HP / 300 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for MB Vito 2.2 CDI 2006 Turbo-Diesel 85.3KW with Bosch Bosch (Bosch software number 383370 ( 1037383370 )). The base stock vehicle for this calibration has a factory output of around 85.3 kW (~116 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Bosch, 383370 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
066C1C0F B94AE4CD E52621BA 8F2423A5 4F67F8A4 A5AAF27E C594B76F 385FAFEC