Stage 1
Stage 1 · Diesel · 111 2200 CDI 109hp
MB Vito 2.2 CDI Stage 1 file Bosch HW 0281011789 · SW 371304
Mercedes-Benz Vito 2.2 CDI Turbo Diesel 80.2 kW (109 HP) Stage 12004, Turbo diesel, 80.2 kW (109 hp)
109 → 131 HP +22 HP +59 Nm 20% more power
Calibrated ECU file for 0281011789 (SW 371304). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 111 2200 CDI 109hp, OM646DE22LA, Diesel. Engine #14624 in our gains database.
- Power
- 131 HP+22 HP from 109
- Torque
- 329 Nm+59 Nm from 270
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281011789 and software 371304.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Vito |
| Model year | 2004 |
| Displacement | 2.2 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 80.2 kW (109 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281011789 |
| ECU software | 371304 |
| Calibration stage | Stage 1 |
| OEM engine code | OM646DE22LA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 109 HP | 270 Nm | — | — |
| Stage 1 | 131 HP | 329 Nm | +22 (20.2%) | +59 |
| Stage 2 | 138 HP | 342 Nm | +29 (26.6%) | +72 |
| Stage 3 | 164 HP | 419 Nm | +55 (50.5%) | +149 |
| Stage 4 | 196 HP | 500 Nm | +87 (79.8%) | +230 |
About this calibration file
The Stage 1 calibration for the 2004 Mercedes-Benz Vito 2.2L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281011789 and software version 371304. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 131 HP and 329 Nm at the crank — a gain of +22 HP (20%) and +59 Nm over the factory 109 HP / 270 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281011789 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for MB Vito 2.2 CDI 2004 Turbodiesel 80.2KW with Bosch 0281011789 (Bosch software number 371304 ( 1037371304 )). The base stock vehicle for this calibration has a factory output of around 80.2 kW (~109 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281011789, 371304 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
6D025C66 A394FB6F 3690C51E F8808F71 B911C3C4 6E2F06EA B10CE458 BC33B9AF