Stage 1
Stage 1 · Diesel · 210/310 CDI 102hp
MB Sprinter 290 TD Stage 1 file Bosch HW 0281001786
Mercedes-Benz Sprinter 290 TD Turbo Diesel 75 kW (102 HP) Stage 1Turbo diesel, 75 kW (102 hp)
102 → 140 HP +38 HP +80 Nm 37% more power
Calibrated ECU file for 0281001786 (SW 356972). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 210/310 CDI 102hp, OM602, 2.9L, Diesel. Engine #4953 in our gains database.
- Power
- 140 HP+38 HP from 102
- Torque
- 300 Nm+80 Nm from 220
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281001786.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Sprinter 290 Td |
| Fuel / Induction | Turbo Diesel |
| Factory power | 75 kW (102 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 356972-973 |
| ECU hardware | 0281001786 |
| Calibration stage | Stage 1 |
| OEM engine code | OM602 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 102 HP | 220 Nm | — | — |
| Stage 1 | 140 HP | 300 Nm | +38 (37.3%) | +80 |
| Stage 2 | 147 HP | 312 Nm | +45 (44.1%) | +92 |
| Stage 3 | 154 HP | 341 Nm | +52 (51%) | +121 |
| Stage 4 | 184 HP | 407 Nm | +82 (80.4%) | +187 |
About this calibration file
The Stage 1 calibration for the Mercedes-Benz Sprinter 290 Td Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281001786. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 140 HP and 300 Nm at the crank — a gain of +38 HP (37%) and +80 Nm over the factory 102 HP / 220 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281001786 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for MB Sprinter 290 TD Turbodiesel 75KW with Bosch 0281001786. The base stock vehicle for this calibration has a factory output of around 75 kW (~102 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281001786. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C5A7346A 300CCCDC 901C68B0 51192CDD B0B35D1C E878A783 73FAE39E 5C3666A3