Original file
Original / Factory · Petrol · 500 V8 306hp
MB SL 500 original file Bosch HW 0261207710 · SW 351728
Mercedes-Benz SL 500 Petrol 225.1 kW (306 HP) Original2002, Petrol, 225.1 kW (306 hp)
306 HP Factory calibration Stock backup file, 460 Nm, Petrol
Calibrated ECU file for 0261207710 (SW 351728). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 500 V8 306hp, M113 E50, 5L, Petrol. Engine #4921 in our gains database.
- Power
- 306 HPfactory calibration
- Torque
- 460 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207710 and software 351728.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Mercedes-Benz |
|---|---|
| Vehicle model | Sl 500 |
| Model year | 2002 |
| Fuel / Induction | Petrol |
| Factory power | 225.1 kW (306 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261207710 |
| ECU software | 351728 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 4966 CC |
| Compression ratio | 10,0 : 1 |
| Bore × Stroke | 97,0 X 84,0 mm |
| OEM engine code | M113 E50 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 306 HP | 460 Nm | — | — |
| Stage 1 | 326 HP | 485 Nm | +20 (6.5%) | +25 |
| Stage 2 | 346 HP | 509 Nm | +40 (13.1%) | +49 |
| Stage 3 | 505 HP | 713 Nm | +199 (65%) | +253 |
| Stage 4 | 597 HP | 851 Nm | +291 (95.1%) | +391 |
About this calibration file
This is the factory (original) ECU calibration for the 2002 Mercedes-Benz Sl 500 Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261207710 and software version 351728. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207710 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for MB SL 500 2002 Benzin 225.1KW with Bosch 0261207710 (Bosch software number 351728 ( 1037351728 )). This original file corresponds to a factory engine output of approximately 225.1 kW (~306 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207710, 351728 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A0E79A30 241A39CB B74CC819 CC95E974 AE006AB2 5A73C5B7 F04E923E 8E6BECF2